|
|
| 14 |
|
|
|
|
| 36 |
|
|
|
| TIGHTEN! |
3/8 X | 57 |
| 15 | 18 |
|
| |||
|
| 2 | 63 |
|
FIGURE 5 |
|
|
| |
|
|
|
|
STEP 5:
•Swing the GUIDE RODS (18) into the guide rod bushings in each of the RIGHT and LEFT BOOM PLATES (14 & 15) as shown in FIGURE 5.
•LOOSELY assemble the RIGHT and LEFT BOOM PLATES (14 & 15) to the UPRIGHT (2) using three 3/8 X
•Slide the SHAFT COLLARS (36) to the top of the GUIDE RODS (18) and tighten set screws as shown in FIGURE 5.
FIGURE 6
4
25
5
63
1
64
3/8 X
STEP 6:
•LOOSELY assemble the RIGHT and LEFT ARM SUPPORTS (4 & 5) to the BASE (1) using four 3/8 X
•Apply WEIGHT STACK LABELS (25) to the WEIGHT PLATES (21) starting on the HEAD PLATE as shown in FIGURE 6.
9