Step | ParaBody cm3 specs

FIGURE 26
16
64
67	3/8 X 3”
2

STEP 26:

•SECURELY assemble one SEAT PAD (16) to the UPRIGHT (2) using two 3/8 X 3” BOLTS (67) and two 3/8” WASHERS (64). See FIGURE 26.

FIGURE 27
25
2
3
8
24
17	44
	44
45

STEP 27:

•Assemble two ROLLER PADS (17) to the LEG PEDESTAL (8) using one 3/4 X 17” TUBE (24) and two 3/4” STARLOCK COLLARS (44) as shown in FIGURE 27.

•Assemble two ROLLER PADS (17) to the SEAT ADJUST (3) using one 3/4 X 17-1/2” TUBE (25), two PLASTIC WASHERS (45) and two 3/4” STARLOCK COLLARS (44) as shown in FIGURE 27.

•Assemble two ROLLER PADS (17) to the UPRIGHT (2) using one 3/4 X 17-1/2” TUBE (25), two PLASTIC WASHERS (45) and two 3/4” STARLOCK COLLARS (44) as shown in FIGURE 27.