Paper Specifications
The documents must all guarantee the following characteristics:
•Use paper matching the indicated characteristics.
•They must have well defined top and left edges, with a square angle tolerance of 0.1° on all edges.
•The paper must not have holes, perforations, folds or tears anywhere within the print area of the document.
•The radius on a corner of the form must be within 9.5 mm from the left or right edge.
•The form to be printed must not contain foreign material.
•Form opacity must be at least 75%. Forms with a lower opacity may cause feed errors.
•Never print on documents with metallic or hard plastic fasteners or staples, they may damage the printer. Use only sewn passbooks.
•To get the maximum print contrast you should print on white or light colored paper. You may overstrike to improve the low contrasting paper.
•It is preferable to use single and multiple documents with the fibre running in the insertion direction of the printing unit.
•Recycled paper is permitted on principle.
•It is preferable to print on multiple forms with a narrow glue strip or
53
