Setting the Interface Parameters

Parallel Interface

The parameters set for the parallel interface match most of the most common environments and the printer can be used immediately after the connection to the host.

In case you need to modify the standard parameters see “ Printer Setup” later in this section.

Serial Interface

Because of the great variety of the possible connection configurations, when you use the serial interface you will need to set the parameters accordingly.

To assure a correct functioning of the printer connected through the serial interface, the transmission parameters set for the printer must match the values set for the host.

For a complete description of the printer setup procedure see the paragraph “Printer Setup”

later in this manual.

22

Page 26
Image 26
CPG SP40 manual Setting the Interface Parameters, Parallel Interface