CPG SP40 Line Mode LF=LF, CR=CR, Lf=Lf+Cr, Lf&Cr=Lf+Cr, Wrap Mode, Slashed Zero, Eject on FF

Setup Parameter	Values	Description
LINE MODE	LF=LF, CR=CR	If the printer receives a LF code (LF), it only performs a line feed. If
		the printer receives a CR code (CR), it only performs a carriage
		return.
	CR=LF+CR	If the printer receives a CR code (CR), it performs a carriage return
		followed by a line feed. If the printer receives a LF code (LF), it
		performs a line feed.
	LF=LF+CR	If the printer receives a LF code (LF), it performs a line feed
		followed by a carriage return. If the printer receives a CR code
		(CR), it only performs a carriage return.
	LF&CR=LF+CR	If the printer receives a LF code (LF) or a CR code (CR), it
		performs both a line feed and a carriage return.
WRAP MODE	truncate,	The data exceeding the line length are truncated (truncate) or
	autowrap	printed on the following line (autowrap).
SLASHED ZERO	no, yes	Selects the printing character for zero, with a slash (yes) or
		without (no).
PRINT DIRECTION	unidir., bidir., sw	Selects the printing direction of the print head: unidirectional
	control	(unidir.), bidirectional (bidir.) or selected via software (sw
		control).
EJECT ON FF	no, yes	Performs a form feed according to the selected page format (no)
		or ejects a cut sheet loaded into the printer (yes).
RESET WITH EJECT	no, yes	When the printer receives a reset command, if this item is set to
		yes the paper inserted in the printer is ejected. If the item is set to
		41