ParaBody 883 manual Step

FIGURE 10
	14
	WEIGHT
9	STACK
	CABLE
	2
	13 3/8 X 1-3/4”
6
10

STEP 10:

•Assemble two 3-1/2” PULLEYS (9) to the LEFT BOOM BRACKET (2) using two 3/8 X 1-3/4” BOLTS (13) and two 3/8” LOW HEIGHT LOCK NUTS (14) as shown in FIGURE 10.

•Route the WEIGHT STACK CABLE around the pulleys in the LEFT BOOM BRACKET (2) as shown in FIGURE 10. (NOTE:

Make sure the cable runs in the grooves of the pulleys.)

•Assemble the WEIGHT STACK PIN (10) to the HEAD PLATE (6) as shown in FIGURE 10.

•Screw the long threaded end of the WEIGHT STACK CABLE into the end of the HEAD PLATE (6) .See FIGURE 10.

11