FIGURE 7
BOOM PLATE
FRAME
3”NYLON SPACER |
|
REAR UPRIGHT | 2” |
| NYLON |
| SPACER |
STEP 7:
•CAREFULLY remove the BOOM PLATE from the the REAR UPRIGHT and the FRAME as shown in FIGURE 7. Discard the BOOM PLATE.
FIGURE 8 |
|
2 | FRAME |
| |
2”NYLON | BOOM BRACKET |
| |
SPACER |
|
3 |
|
| REAR |
| UPRIGHT |
STEP 8:
•Swing the GUIDE RODS (3) into the guide rod bushings in the LEFT BOOM BRACKET (2) as shown in FIGURE 8.
•SECURELY assemble the LEFT BOOM BRACKET (2) and the BOOM BRACKET to the REAR UPRIGHT and the FRAME using the previously removed bolts, nylon spacers, washers and lock nuts as shown in FIGURE 8.(NOTE: The 2” NYLON SPACERS go on the LEFT BOOM BRACKET only.)
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
|
| 1/2 |
0 | 1 | 2 | 3 | 4 | 5 | 6 | ||||||
9