ParaBody 883 manual Boom

Page 28

7

FIGURE 19

STEP 19:

•Route the new PRESS STACK CABLE (7) thru the REAR UPRIGHT as shown. (NOTE: Remove pulleys for ease of installa- tion.) Slide GUIDE RODS up just enough to get the cable end thru. Push GUIDE RODS down when finished.

STEP 20:

•Route the new PRESS STACK CABLE (7) around the pulleys in the BOOM BRACKET using the existing bolts as shown in FIGURE 20. (NOTE: Make sure the cable runs in the grooves of the pulleys.)

•Screw the threaded end of the PRESS STACK CABLE (7) into the end of the HEAD PLATE. See FIGURE 20.

FIGURE 20

BOOM

BRACKET

7

HEAD

PLATE

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Second Stack Option For 880 GYM System Important Safety Information Important Notes Parts List Step Rear Upright Step Optional Boom Plate Frame 3NYLON Spacer Rear Upright Nylon Pulley Boom Bracket Weight Stack Cable Step Step Boom Pulley Plates Adjustment Step Short LEG Press Cable Short LEG Press Boom Bracket Short LEG Press Cable Frame Pulley Bracket PEC Station PAD Frame Step Optional Boom Plate Frame 2NYLON Boom Bracket Spacer Rear Upright Pulley Make sure the cable runs in the grooves of the pulleys LAT Cable Step Boom Base Cable Routing Diagram Adjustment
Top Page Image Contents