ParaBody 883 manual Rear Upright

REAR UPRIGHT

3/8 X 4” BOLTS

FIGURE 2

STEP 2:

•Remove the two 3/8 X 4” BOLTS, four 3/8” WASHERS and two 3/8” LOCK NUTS from the REAR UPRIGHT as shown in

FIGURE 2.

FIGURE 3
	16	3/8 X 4-1/4”
		17
BASE FRAME	1	18
3/8 X 4” BOLTS

STEP 3:

•SECURELY assemble the STACK BASE (1) to the BASE FRAME using two 3/8 X 4-1/4” BOLTS (16), two previously removed 3/8 X 4” BOLTS, four 3/8” WASHERS (18), four previously removed 3/8” WASHERS, two 3/8” LOCK NUTS (17) and two previously removed 3/8” LOCK NUTS as shown in FIGURE 3.

6