ParaBody 883 manual LAT Cable

	LAT CABLE
	PULLEY
FIGURE 16	PULLEY
	PLATES

STEP 16:

•Route the previously removed original LAT CABLE through the FRAME (1) and assemble one 3-1/2” PULLEY to the PULLEY PLATES using one existing 3/8 X 1-3/4” BOLT and one exsisting 3/8” LOCK NUT. See FIGURE 16.

FIGURE 17

24

LAT CABLE

STEP 17:

•Securely assemble the LAT CABLE to the THREADED HOUSING (24) then assemble the THREADED HOUSING (24) to the BOOM BRACKET using one previously removed 3/8 X 3-3/4” BOLT, two previously removed 3/8 X 1” SPACERS and one previ- ously removed 3/8” LOCK NUT as shown in FIGURE 17.

26