ParaBody 883 manual Base

	PULLEY PLATES
BASE	PULLEY
FRAME
	LONG LEG
	PRESS CABLE
	1
LONG LEG
PRESS CABLE	3/8 X 1-3/4”
FIGURE 21
STEP 21:

• Assemble the LONG LEG PRESS CABLE (from the 883 LEG PRESS OPTION box) to the PEDESTAL and route the LONG LEG PRESS CABLE thru the BASE FRAME as shown in FIGURE 21. (NOTE: Remove pulleys for ease of installation.)

•Route the LONG LEG PRESS CABLE around the 3-1/2” PULLEY on the PULLEY PLATES using one existing 3/8 X 1-3/4” BOLT and one existing 3/8” LOCK NUT. See FIGURE 21.

•Route the LONG LEG PRESS CABLE around one previously removed 3-1/2” PULLEY and assemble to the bracket on the BASE

FRAME using one existing 3/8 X 1-3/4” BOLT and one existing 3/8” LOCK NUT. See FIGURE 21.

1/2	1/2	1/2	1/2	1/2	5	1/2
0	1	2	3	4		6

29