S T E P
3
A.
B.
C.
D.
E.
F.
Be careful to assemble all components in the sequence they are presented.
Attach Seat Pad (AA) to the Seat Pad Frame (L) as shown using:
Two 56 (8mm x 45mm hex head bolt)*
Two 62 (8mm spring lock washer)
Two 65 (8mm washer)
Attach two End Caps (23) to the front and back of Seat Pad Frame (L) as shown.
*NOTE:
Do NOT
Slide two Plastic Bushings (20)* into the openings in the Lower Main Frame (A) as shown. Slide the Seat Pad Frame (L) into the two Plastic Bushings (20).
Hold the Seat Pad Frame (L) in place with
One 57 (6mm x 10mm socket head bolt)
One 102(6mm spring lock washer)
Insert End Cap (2)* into Seat Pad Frame (L) as shown. *NOTE:
These parts might be pre-installed.
Attach Back Pad(AA) to the Back Pad Frame (M) as shown using:
Two 56 (8mm x 45mm hex head bolt)
Two 62 (8mm spring lock washer)
Two 65 (8mm washer)
Attach two End Caps (23) to the front and back of Seat Pad Frame (L) as shown.
*NOTE:
Do NOT
Attach Back Pad Frame (M) onto Back Pad Adjustment (N) using:
One 95(12mm x 135mm hex head bolt)
One 97 (12mm washer)
One 96 (12mm nylon lock nut)
Two 84 (bushing)*
*NOTE:
These parts might be pre-installed.
Slide two Plastic Bushings (20) into the opening on the Upper Main Frame (D) as shown. Slide the Seat Pad Frame (N) into the two Plastic Bushings (20).
Hold the Seat Pad Frame (N) in place with
Insert
To stop the Seat Pad Prame (L) from sliding all the way out insert:
One 57 (6mm x 10mm socket head bolt)
One 102(6mm spring lock washer)
You can now wrench tighten all bolts and nuts in this step. Do NOT
MM | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 |
Inch | 0 | 1 | 2 | 3 | 4 | 5 | 6 |
12