Maintenance and TROUBLE-SHOOTING

Inspect and tighten all parts of the elliptical crosstrain- er regularly. Replace any worn parts immediately. To prevent damage to the console, keep liquid away from the console, keep the console out of direct sunlight, and remove the batteries when storing the elliptical crosstrainer.

PULSE SENSOR TROUBLE-SHOOTING

¥	Avoid moving your hands while using the pulse sen-
	sor. Excessive movement may interfere with heart
	rate readings.
¥	If your heart rate is not shown when the pulse sen-

The elliptical crosstrainer can be cleaned with a soft, damp cloth. Be sure to keep the frame clean where the pedal wheels move.

Frame

Pedal Wheel

	sor is used, press the reset button to reset the pulse
	sensor.
¥	Do not hold the metal contacts too tightly; doing so
	may interfere with heart rate readings.
¥	For the most accurate heart rate reading, hold the
	metal contacts for about 15 seconds.
¥	For optimal performance of the pulse sensor, keep
	the metal contacts clean. The contacts can be

BATTERY REPLACEMENT

If the console does not function properly, the batteries should be replaced. Refer to assembly step 1 on page 5 for battery replacement instructions.

cleaned with a soft clothÑnever use alcohol,

abrasives, or chemicals.