Reebok Fitness RBEL9906.3 manual Attach the Right Link Arm 31 in the same way

Page 10

10.Attach the Left Link Arm (30) to the Left Pedal Arm (32) with an M8 x 15mm Button Screw (106), an M8.5 x 16mm x 1.5mm Washer (103), and an Axle Cover (66).

Attach the Left Link Arm (30) to the left Upper Body Leg (24) with an M8 x 25mm Button Screw (110), two M8.5 x 16mm x 1.5mm Washers (103), two Axle Covers (66), a Link Arm Spacer (74), and an M8 x 15mm Button Screw (106) as shown.

Attach the Right Link Arm (31) in the same way.

10
	24
			31
			106
66	74	103
66	74	66
103		66
103
110
		30
		106	66
		103	66
			32

11.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.

Plug the power cord into the power socket at the rear of the elliptical exerciser (see HOW TO PLUG IN THE POWER CORD on page 11). IMPORTANT: If the elliptical exerciser has been exposed to cold tempera- tures, allow it to warm to room temperature before plugging in the power cord. If you do not do this, the console displays or other electronic components may become damaged.

10

Image 10

Contents Call TOLL-FREE QUESTIONS?Model No. RBEL9906.3 Serial No Mon.-Fri a.m.-6 p.m. MST Sat a.m.-4 p.m. MSTTable of Contents Important Precautions Before YOU Begin Assembly Screw M10 x 93mm Button ScrewPage See the inset drawing. Lift the Pedal Arm 107 Repeat this step with the Right Link Arm Attach the Right Link Arm 31 in the same way HOW to Plug in the Power Cord HOW to USE the Elliptical ExerciserHOW to Fold and Unfold the Elliptical Exerciser HOW to Move the Elliptical Exerciser HOW to Exercise on the Elliptical ExerciserConsole Diagram Features of the ConsoleSelect the manual mode HOW to USE the Manual ModeFollow your progress with the display Turn on the fan if desired Turn on the console. See on Select a preset program HOW to USE a Preset ProgramBegin pedaling to start the program HOW to Create a Custom Program Turn on the console. See on Select a custom programEnter a target heart rate setting HOW to USE a Heart Rate ProgramTurn on the console. See on Select a heart rate program HOW to USE a Custom Program Change the program if desiredBegin pedaling to start the program HOW to USE AN Ifit Program HOW to USE the Stereo Sound SystemHOW to Adjust the Belt Maintenance and TroubleshootingHandgrip Pulse Sensor Troubleshooting HOW to Eliminate Rubbing of the DiscsWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. RBEL9906.3 Key No. Qty DescriptionQty Description R1007A Exploded Drawing B-Model No. RBEL9906.3 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT