Life Fitness SM51 manual Unpacking, Parts box contents

Page 3

SM51 Unpacking & Assembly Instructions

UNPACKING

Follow the steps below when unpacking the components of the SM51.

1.Cut off the shipping wrapper.

2.Remove the parts box and shipping boards.

3.Remove the items in the parts box. These items are shown in Figure 1.

A.Remove the bolts bag.

B.Remove the parts shown below. Parts that are used to build the SM51 are described in the section HARDWARE at the end of these instructions.

Figure 1. Parts box contents.

3

Image 3
Contents M051-K50-B112 Assembly Time Materials and Tools Required for AssemblyUnpacking Parts box contentsSM51 main components seats and cables removed for clarity AssemblySet the weight stack cells Configuration for 2-3/4 and 3 bolts Configuration for 6 bolts Putting on the weight stacks SM51 Unpacking & Assembly Instructions Mount the benches to the frame Bolt the benches to the frame Removing the pulley bolts Installing the CablesAdjustable crossover cable routing Adjustable Crossover Cable RoutingLOW ROW Cable Routing Adjustable crossover cable end detailLAT Pulldown Cable Routing Screw the cable into the weight stackTricep pushdown cable routing Tricep Pushdown Cable RoutingHardware Hardware . Assembly PartsHardware . Rubber cap Hardware . Cables Hardware . Cable jam nutHardware . Top assemblies Hardware . Floating pulleys Hardware . Weight stack rubber bumpersParts List Floating pulley InstalledHardware installed Pulley hardware