SM51 Unpacking & Assembly Instructions
7.Mount adjustable pulley brackets. When shipped, the adjustable pulley brackets look like the ones shown in Figure 13. The bolts need to be removed and the bracket needs to be positioned so that the top of the bracket is in the top hole as shown by the arrow in Figure 13. Use a 3” bolt with flat washers, end cap washers and end caps. When you remove the bolts, leave the pulley bolt and pulley out since you will need to thread the cable with the pulley removed.
Figure 13. Mount adjustable pulley bracket.
8.Mount the seated row and lat bench to the frame. Using the bolts specified in Figure 14 and a 9/16” socket and combination wrenches, mount the benches as shown in Figures 14 and 15.
Use a pinch bar to align the seat frame holes to the cubes 
3/8” x
3/8” x 3” (2)
Figure 14. Mount the benches to the frame.
10