Life Fitness 660 manual Underside

Page 22

53

 

4

 

 

 

 

 

 

 

8

UNDERSIDE

76

 

 

 

 

 

3

 

92

49

 

48

 

 

 

 

 

49

107

 

 

 

43

3/8 X 2-3/4” 85

 

 

 

FIGURE 21

 

 

 

STEP 21

SECURELYattach one 4-1/2” PULLEY(43) to the COUNTER LEVER (3) using one 3/8 X 2-3/4” BOLT (85), two 3/8” FLANGE SPACERS (49) and one 3/8” LOCK NUT (92). See FIGURE 21.

SECURELY attach two 1 X 1” GLIDES (53) to the UNDERSIDE of the COUNTER LEVER (3) as shown in FIGURE 20.

Insert two 3/4” FLANGE BEARINGS (76) into the COUNTER LEVER (3) as shown in FIGURE 21.

Hold the COUNTER LEVER (3) between the REAR (4) and MIDDLE UPRIGHTS (8) and slide the 3/4 DIA X 11” SHAFT (107) throught the MIDDLE UPRIGHT (8), COUNTER LEVER (3), and through the collar on the REAR UPRIGHT (4). To SECURE the SHAFT (107) in place, insert two 5/16” SET SCREWS (48) into the collars on the UPRIGHTS and tighten. See FIGURE 21.

22

Image 22
Contents GYM System Important Safety Information Important Notes Square = 1’ X 1’ Parts List Step 87 1/2 X Hexnut Step 84 3/8 X Step 88 1/2 X X 3 108108 3/8 HEX NUT Step 104 105 Step Step Step Step LOW Height NUT PUSH/PULL Underside Justment Tube 22 to rotate freely LOW Height NUT Detail Button Cable has been routed 90 1/2 X 3-1/2 Post Detail Support Tube to rotate freely Hexnut Page 102 Cable Installation 100 Cable LAT PEC Cable See Detail 83 3/8 101 Legext Cable LAT Cable Press Step Legext Press Cable Base LEG Cable Elastic Cord LAT Cable 105 96 3/8 X 1 Button Step Maintenance Limited Warranty International Offices