Life Fitness 660 manual See Detail

FIGURE 42	92	25
		103 AB CABLE
	42		91
SEE DETAIL 39		49
		3/8 X 2-3/4”	85
			DETAIL 42

STEP 42

•Securely assemble the ball end of the AB CABLE (103) and one 3-1/2” PULLEY (42) to the FRONT UPRIGHT (25) using two 3/8 X 2- 3/4” BOLTS (85), two 3/8” FLANGE SPACERS (49), two 3/8” WASHERS (91), and two 3/8” LOCKNUTS (92). (NOTE: TheAB

CABLE (103) should be routed underneath the retaining bolt as shown in DETAIL42.)

FIGURE 43

29

103

FLOATING

PULLEY

39

STEP 43

•Run the AB CABLE (103) through the floating pulley assembly, then screw the threaded end of AB CABLE (103) approxi- mately 3/4” into the end of the PULLEY BRACKET (29) and tighten jam nut securely as shown in FIGURE 43.

IMPORTANT! Make sure the cables are running in the grooves of all pulleys.