Life Fitness 660 manual 83 3/8 101

FLOATING

PULLEY

83 3/8 X

1-1/4”

101

15 91

92

1

101

FIGURE 44

STEP 44

•To assemble the LEG CABLE (101) follow the cable routing as shown and use the following steps:

•SECURELY attach the LEG CABLE (101) to the LEG CURL/EXT (15) using one 3/8 X 1-1/4” BOLT (83), one 3/8” WASHER (91), and one 3/8” LOCK NUT (92). See FIGURE 44.

•Route the LEG CABLE (101) around the pulleys in the BASE (1) and through the floating pulley as shown in FIGURE 44.

FIGURE 45

STEP 45

• Run the LEG CABLE (101) through the hole of the D-RING (7) and attach one KEYHOLE CLEVIS (66) to the end of the LEG CABLE (101). See FIGURE 45.

101

66

101

LAT CABLE
PRESS CABLE	7

1/2	1/2	1/2	1/2	1/2	5	1/2
0	1	2	3	4		6

40