Life Fitness 660 manual Detail

Page 25

27

13

PUSH/PULL

CABLE

DETAIL

 

 

23

 

1/4” NUTS

 

 

DONOTOVERTIGHTEN!

 

SPRING PIN

 

ASSEMBLY

FIGURE 25 13

 

DETAIL 25

STEP 23

SECURELY assemble the SPRING PIN ASSEMBLY of the PUSH/PULL CABLE to the SPRING PIN BARREL on the RECEIV-

ING TUBE (13). (!!! IMPORTANT !!! TIGHTEN THE NUT OF THE SPRING PIN ASSEMBLY SECURELY)

Swing the PRESS ARM (27) up until the SPRING PIN of the PUSH/PULL CABLE engages in one of the adjustment holes.

Thread the second 1/4-28 IN. NUT onto the threaded end of the CABLE, and cinch the two 1/4-28 IN. NUTS around the flat. (IMPOR-

TANT!DONOTOVERTIGHTENNUTS!)

Use the extra thread on the end of the CABLE to adjust out slack. ( !!! DO NOT ADJUST OUT TO FAR !!! ALWAYS ALLOW SPRING PIN ASSEMBLY TO FULLY ENGAGE)

 

 

 

 

STEP 26

 

 

3/8 X 1-1/4” 83

 

 

SECURELY assemble the SEAT PAD (40) to the

91

 

BACK PAD ADJUST (16) using four 3/8 X 1-1/4”

 

 

16

40

BOLTS (83) and four 3/8” WASHERS (91). See

 

 

 

 

FIGURE26.

 

 

25

 

 

 

SECURELY assemble one 3/8” SPRING PINASSEM-

 

 

 

BLY (51) to the FRONT UPRIGHT (25) as shown in

51

 

 

 

 

 

 

FIGURE26.

 

 

 

 

 

 

 

 

 

 

 

 

• Attach one 3-PRONG KNOB (61) the FRONT UPRIGHT

 

 

 

 

(25) as shown in FIGURE 26.

 

61

 

 

 

• Insert the SEAT PAD (40) & BACK PAD ADJUST

 

 

 

 

 

 

 

 

(16) into the FRONT UPRIGHT (25) while pulling back

 

 

 

 

on the SPRING PIN ASSEMBLY (51) until it engages

 

 

 

 

in one of the adjustment holes. See FIGURE 26.

FIGURE 26

 

 

 

 

 

 

1/2

1/2

1/2

1/2

4

1/2

1/2

0

1

2

3

5

6

 

 

 

25

 

 

 

Image 25
Contents GYM System Important Safety Information Important Notes Square = 1’ X 1’ Parts List Step 87 1/2 X Hexnut Step 84 3/8 X Step 88 1/2 X X 3 108108 3/8 HEX NUT Step 104 105 Step Step Step Step LOW Height NUT PUSH/PULL Underside Justment Tube 22 to rotate freely LOW Height NUT Detail Button Cable has been routed 90 1/2 X 3-1/2 Post Detail Support Tube to rotate freely Hexnut Page 102 Cable Installation 100 Cable LAT PEC Cable See Detail 83 3/8 101 Legext Cable LAT Cable Press Step Legext Press Cable Base LEG Cable Elastic Cord LAT Cable 105 96 3/8 X 1 Button Step Maintenance Limited Warranty International Offices