ASSEMBLY
Step 11: |
|
ROUTING THE TOP CABLE: |
|
Insert the bolt end of the cable through |
|
the slot in the tube (ball outside). Route | ball end |
the cable over pulley T1, continue through |
pulley T2, down and around pulley T3, up and around pulley T4, down and screw the cable bolt end into the threaded end of the Select Rod (23) at least 7 complete turns.
TOP CABLE (42) | bolt end |
assembly instructions
TOP CABLE | T2 | |
PATH | ||
| ||
| T1 |
INSERT CABLE THROUGH | T3 |
T4 | |
SLOT IN TUBE, LEAVE THE |
|
BALL ON THE OUTSIDE |
|
T5