Gold's Gym GGBE1657.0 manual Repeat this step with the two Short Pad Tubes

8.	Insert the Long Pad Tube (36) into the bracket	8
	on the Front Leg (4). Slide two Foam Pads (22)
	onto the Long Pad Tube, and press a Pad Cap
	(23) into each Foam Pad.
	Repeat this step with the two Short Pad		23
			22
	Tubes (21).				4
				36
				21	Bracket
					22
					23
					21
9.	Attach the Bumper (30) to the Curl Bar (17)	9
	with an M4 x 19mm Screw (51).
	Attach the Curl Bar (17) to the Leg Lever (5)			17
	with the Curl Bar Pin (33). Then, attach the
	Tether (34) on the Curl Bar Pin to the Leg Lever			30
	with an M4 x 19mm Screw (51).			51
				5
				34
					51
				33
10.	Attach the Curl Pad (20) to the Curl Post (6)	10			20
	with two M6 x 20mm Screws (47).
					6
					47
		9