Healthrider 831.159710 manual Seat Assembly

Page 12

22.Attach the end of the Short Cable (23) to the Long “U”-Bracket (57) with a 1/4” Nylon Lock- nut (2) and a 1/4” Flat Washer (10). Do not completely tighten the Nylon Locknut; it should be threaded onto the end of the Cable until two threads are showing above the Nylon Locknut, as shown in the inset drawing.

CABLE ASSEMBLY

23.Attach the Backrest (41) to the Front Upright (42) with two 1/4” x 2 1/2” Screws (43) and two 1/4” Flat Washers (10).

SEAT ASSEMBLY

12

22
	2
10	57
10
	23
	2
	10
57	23
23
	42
	41
	43 10

Image 12

Contents Model No Serial No SEARS, Roebuck and CO. Hoffman ESTATES, ILTable of Contents Full 90 DAY WarrantyImportant Precautions Dimensions Before YOU BeginAssembly Chart located in the center of this manualFollowing Tools not Included are Required for Assembly Refer to drawing 2b. Align the hole Tighten the Nylon Locknuts yetTighten all Nylon Locknuts used in steps Through Assembly Cable Assembly Cable Assembly Bracket Ball Crossbar Inset shows view From other sideSeat Assembly Locknut. The Leg Lever must pivot freely Seat Assembly Adjustment Adding Weights to the Weight CarriageAttaching and Removing the Seat Attaching the LEG Lever to the LOW Pulley StationEyebolt is positioned vertically on the Leg Lever Weight Resistance Chart Weight on Press ARM Butterfly ARM LOW Pulley High PulleyLbs LEG LeverTROUBLE-SHOOTING and Maintenance Tightening the CablesCable Diagram Long Cable 58 TOP ViewShort Cable 831.159710 R0801A Page Page Part LIST-Model No Qty DescriptionExploded DRAWING-Model No Model No SEARS, Roebuck and CO., Hoffman ESTATES, IL