
Lap time and split time
The lap time displays elapsed time from the last press of the LAP button.
The split time displays the elapsed time from the start of measurement to the point LAP button is pressed.
Start of |
|
|
measurement LAP | LAP | |
Lap time 1 |
| TM |
Lap time 2 |
| |
Split time 1 |
|
|
Split time 2 |
|
|
Target cadence zone
During measurement, on the screen displays the target cadence zone status.
(constant) : The target zone is turned on.
(flashing) : The current cadence is out of the zone.
(off) | : The target zone is set to off. |
ENG
Target cadence
*The measured lap data is saved to a file when you perform a reset operation (page 16) and can be reviewed in “File view” (page 23).
*Pressing the LAP button while the total number of laps reaches 99 points displays the lap data, but
Advance use of the real time lap data |
|
| |
For the real time lap data indicated in the lower dis- |
|
| |
play, the unit starts/stops measurement in sync with |
|
| |
the main time measurement; however, it resets and |
| (For 2 seconds) | |
restarts the data every time you press the LAP but- |
| ||
M2/- | M2/- | ||
ton. | |||
|
| ||
This independent feature of lap time can be useful |
|
| |
also for intervals and sectional trials such as hill |
|
| |
climb section. |
|
|
Countdown distance
The countdown distance feature displays the countdown distance to a predetermined target trip distance, and notifies when it reaches zero. When it reaches the target trip distance, the unit switches any mea-
surement data to the countdown data, and notifies it by flashing the | In case of 20 km | |
|
| |
numeric/dot display and an alarm sound. |
|
|
|
|
*The target cadence zone set from the menu screen “Setting the target cadence zone” (page 33).
zone
Example of how the countdown distance is used | Beep |
1.Entering the race event distance
For distance system events such as a road race and century ride, enter the race event distance before the start, and develop your strategy and pace based on the countdown distance during the race.
2.Entering the destination sign distance
When reached (displays for 5 seconds)
For touring, enter the sign distance whenever you encounter a destination sign along the road, and develop your pace based on the countdown distance.
3.Entering the periodical target distance
Enter the periodical target distance for a week, month, or year to check your progress.
*The target trip distance is set from the menu screen “Setting the countdown distance” (page 31).