Starting/Stopping the measurement
Initially, the unit starts or stops measurement automatically in sync with the bicycle motion. This is called
The total distance, maximum speed, and maximum cadence are up- dated independently of stating/stopping measurement.
Auto-mode function
When the 
lights up), the unit detects the wheel spinning, and starts/stops measurement automatically. When the 
lights off), the unit starts/ stops measurement by using the SSE button.
*For on/off of the
* When the transmission is stopped and Sensor signal icons , are off (page 14), the main timer may not start due to speed signal not responding.
Press the M1/+ or M2/- button to turn on the sensor signal icons
,.
Backlight
Pressing the LT button illuminates the displays for about 3 seconds.
*Pressing any button while backlight is still on extends the illumination for another 3 seconds.
AT icon
LT
SSE
Measurement screen
| ENG |
Upper and middle display data |
1 | 1 Current speed | |
|
| |
|
| Displays the current speed. |
|
| Updated every second. |
| 2 Cadence |
| Displays the number of pedal rotations per minute. |
2 | Updated every second. |
3 |
|
| 3 Average speed *1 |
| Displays the average speed after the start of measurement. |
| 4 Average cadence *2 |
4 | Displays the average cadence after the start of measurement. |
| * The average will not be reflected when you stop pedaling. |
Resetting the measurement data
To reset the measurement data (TM, DST, Lap Time, C.D. DST, etc) and the lap data, simultaneously press the SSE button and the M1/+ or M2/- button in the measurement screen.
*Resetting the measurement data saves the data automatically on a file. (page 23)
*The screen will freeze for about 2 seconds after resetting; however, all measurements are operating normally, including the elapsed time.
*The countdown setting (C.D.DST→) is returned to the manu set value you set.
*Cannot reset for 5 seconds after pressing the LAP button.
M1/+
SSE 
( S i m u l t a -
neously press)
(or)
SSE 
M2/-
( S i m u l t a - neously press)
| 5 | 5 Maximum speed | |||
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| Displays the maximum speed after the start of measurement. |
|
|
|
|
| Updated independently of starting/stopping measurement. |
|
|
|
|
| 6 Maximum cadence |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| Displays the maximum cadence after the start of measurement. |
|
|
|
|
| |
| 6 | ||||
| Updated independently of starting/stopping measurement. | ||||
|
|
|
|
| |
| *1: When the trip distance (DST) exceeds 10,000 km [mile], or the elapsed time (TM) | ||||
Power-saving function
When the computer does not receive any data for 5 minutes, it will |
|
enter the |
|
By pressing any buttons except the AC recovers from the power- |
|
saving mode, and the measurement screen appears. You must press |
|
a button when the computer is in power saving mode before it will | |
start to measure any data. | |
|
|
exceeds 100 hours, [E] appears indicating further measurement is impossible. Clear |
the data by resetting (page 16). |
*2: This device calculates the average excluding the time when you stop pedaling. This |
feature produces actual averages, which are different from those with conventional |
models that calculate it for the entire measurement time period. |