Contents, Proper use of the CatEye V2c | Cateye CC-TR200DW (V2c)

Contents
Introduction		1
About the manuals		1
Proper use of the CatEye V2c		3
Description of computer and its parts ....		4
Computer		4
Accessories		4
Screen display		5
How to install the unit on your bicycle		6
1.	Attach the bracket to the stem or
	handlebar	6
2.	Mount the speed sensor and
	magnet	7
3.	Remove/Install the computer	8
Preparing the computer		9
Removing the insulation sheet		9
1. Formatting/Restarting operation ....		10
2.	Date/Clock setting	11
3.	Tire circumference input	12
4.	Set the sensor ID	13
5.	Selecting speed unit	14
6.	Operation test	14
Sensor signal status		14
Basic operation of the computer		15
Functions on the measurement
screen		15
Starting/Stopping the
measurement		16
Backlight		16
Resetting the measurement data ....		16
Power-saving function		16
Measurement screen		17
Upper and middle display data		17
Lower display data		18
Pace function		19
Lap function		19
Countdown distance		20
Target cadence zone		21

Changing the computer
configuration	22
File view (FILE VIEW)	23
Setting the clock/date
(CLOCK.DATE)	27
Wheel selection and tire
circumference (WHEEL)	28
Searching the sensor ID
(SEnSOR-ID)	28
Setting the measurement unit
(UnIT)	30
Total distance manual entry
(ODO InPUT)	30
Setting the auto-mode
(AUTO MODE)	31
Setting the countdown distance
(C.D.DST→)	31
Setting sound (SOUnD)	32
Setting the target cadence zone
(CDC.ZOnE)	33
Use of the target zone	34
Trouble shooting	35
Trouble on display	35
Trouble on operation	36
Replacing battery	37
Computer	37
Speed sensor	37
Maintenance	38
Spare accessories	38
Specifications	39
Registration	40
Limited warranty	40

Proper use of the CatEye V2c

Observe the following instructions for safe usage.

The meaning of icons in this manual:

Warning!!! : Sections marked with these icons are critical for safe use of the device. Be sure to follow these instructions.

Caution: Important cautionary notes on the use and operation of the V2c.

* Helpful tips are highlighted with asteriks.

Warning!!! :

•Do not concentrate on the data while riding. Always be sure to ride safely.

•Do not leave any battery within the reach of children, and dispose of them correctly. If a battery is swallowed, consult a doctor immediately.

Caution:

•Regularly check the positions of the magnets and the speed/cadence sensors and make sure that they are securely mounted. Tighten it firmly if there is any looseness.

•Avoid leaving the main unit / wireless sensor in direct sunlight for extended periods of time.

•Do not disassemble the computer, or speed sensor.

•Do not subject the computer, or speed sensor to strong impact; take care also to pre- vent any of them from falling.

•Do not use paint thinner or rubbing alcohol to clean the unit.

•As a nature of liquid crystal displays, sunglasses with polarized lens may block the visibility.

2.4GHz digital wireless system

2.4GHz-frequency digital communication technology, which is used for wireless LAN, is adopted for both the speed/cadence integrated type speed sensor. This technology prac- tically eliminates interference from external noise and cross-talk with other wireless com- puter users, and enables to store highly reliable data. However, in a very rare occasions, objects and places may generate strong electromagnetic waves and interference, which may result in incorrect measurement:

•TV, PC, radios, motors/engines, or in cars and trains.

•Railroad crossings and near railway tracks, around television transmitting stations and radar bases.

•Other wireless computers or digitally controlled lights.

ENG

ENG-2

ENG-3