Cateye CC-TR200DW (V2c) Maintenance, Spare accessories, Specifications, Standard accessories

Page 20

Maintenance

Perform the daily care according to the following instructions.

Regularly check that the positions of the magnets and sensors are correct, and they are secured firmly.

When the computer, and speed/cadence are dirty, wash them with water or wipe them with a soft cloth dampened with diluted neutral detergent, then wipe with dry cloth. Do not use solvents such as benzine or rubbing alcohol as they may damage the sur- faces.

Spare accessories

Standard accessories

#160-2380

#160-2385

#160-0280

Parts kit

Speed sensor kit

Bracket band

#160-2193

#169-9691

#169-9766

Bracket

Wheel magnet

Cadence magnet

#166-5150

Lithium battery (CR2032)

Specifications

Display

Upper display

Current speed

0.0 (4.0) 150.0 km/h [0.0 (3.0) 93.0 mph]

functions

 

 

 

 

For 27-inch tire size

 

 

 

Average speed

0.0 - 150.0 km/h [0.0 - 93.0 mph]

 

 

 

Maximum speed

0.0 (4.0) 150.0 km/h [0.0 (3.0) 93.0 mph]

 

 

 

 

 

 

Middle display

Cadence

 

0 (20) 199 rpm

 

 

 

Average cadence

0 199 rpm

 

 

 

Maximum cadence

0 (20) 199 rpm

 

Lower display

Date

 

‘07.01.01 '99.12.31(Display format can be switched)

 

 

 

Clock

 

0:00’00” 23:59’59”

 

 

 

 

 

[AM 1:00’00” PM 12:59’59”]

 

 

 

 

 

(Both 12 and 24-hour modes can be selected)

 

 

 

Total time

 

0 99999 hour

 

 

 

Odometer

 

0.0 9999.9/10000 999999 km [mile]

 

 

 

Elapsed time

00’00”0 59’59”9 / 1:00’00” 99:59’59”

 

 

 

Trip distance

0.00 9999.99 km [mile]

 

 

 

Countdown distance

9999.90 0.00 km [mile]

 

 

 

Lap number

 

L-01 L-99

 

 

 

Average lap speed in real time

0.0 150.0 km/h [0.0 93.0 mph]

 

 

 

Lap timer

 

00’00”0 59’59”9 / 01:00’00” 99:59’59”

 

 

 

Trip lap distance in real time

0.00 9999.99 km [mile]

 

 

 

 

 

Lap

 

Upper display (average lap speed,maximum lap speed)

 

 

 

Middle display (average lap cadence,Lap number,maximum lap cadence)

 

 

 

Lower display (trip lap distance,lap time,split time)

Control system

 

 

4-bit one-chip microcomputer, crystal oscillator

Display system

 

 

Liquid crystal display (EL backlight)

Speed/Cadence sensor signal detection system Noncontact magnetic sensor

 

 

Sensor signal transmission and reception

2.4 GHz ISM Band

Communication range

 

 

5 m (above 5 m, transmission distance may vary due to environmental conditions)

 

 

 

Operating temperature range

 

32 °F 104 °F [0 °C 40 °C]

 

 

 

 

(This product will not function appropriately when exceeding the

 

 

 

 

Working Temperature range. Slow response or black LCD at lower

 

 

 

 

or higher temperature may happen respectively.)

 

 

 

Storage temperature range

 

-4 °F 122 °F [-20 °C 50 °C]

Wheel circumference set range

0100 3999 mm

Power supply/battery life Computer

: CR2032 x 1 / Approx. 1 years (When using 1 hour/day)

 

 

Speed sensor

: CR2032 x 1 / Approx. 1 years (When using 1 hour/day)

Dimensions/Weight

Computer

: 2-7/32” x 1-1/2” x 11/16” (56.0 x 38.0 x 17.3 mm) / 0.98 oz (28 g)

 

 

 

 

(With the batteries)

 

 

Speed sensor

: 2-9/16” x 3-9/16” x 9/16” (65.0 x 90.5 x 14.4 mm) / 1.25 oz (36 g)

 

 

 

 

(With the batteries)

*When the elapsed time exceeds 100 hours, or the trip distance exceeds 9999.99 km/h, “E” appears in place of the average speed.

*Designs and specifications are subject to change without notice, due to modifications or improvements.

ENG

ENG-38

ENG-39

Image 20
Contents Introduction About the manualsContents Proper use of the CatEye V2cComputer AccessoriesDescription of computer and its parts Screen display Mount the speed sensor and magnet How to install the unit on your bicycleAttach the bracket to the stem or handlebar Remove/install the computer Preparing the computerDate/Clock setting Formatting/Restarting operation24h ↔ 12h ENG-10How to measure the tire circumference L Tire circumference inputSet the sensor ID Tire circumferenceBasic operation of the computer Selecting speed unitOperation test Functions on the measurement screenResetting the measurement data Power-saving functionMeasurement screen Starting/Stopping the measurementLap function Lower display dataPace function Target cadence zone Countdown distanceLap time and split time Advance use of the real time lap dataChanging the computer configuration File viewMeasurement data to be recorded in a file Date of creation New OldViewing the lap data ENG-24Setting the clock/date Switching the file numberDeleting files ENG-26Wheel selection and tire circumference Searching the sensor ID↔ B ENG-28Setting the measurement unit Setting the auto-modeSetting the countdown distance Total distance manual entrySetting sound CDC.ALARM ↔ BUTTOnOn ↔ OFF M1/+M2/- or ENG-32Trouble shooting Use of the target zoneCadence zone Trouble on displayReplacing battery Trouble on operationSpeed sensor ENG-36Maintenance Spare accessoriesSpecifications Standard accessoriesLimited warranty RegistrationYear computer, and speed sensor Not including depletion of batteries