Huffy Sports Basketball Systems manual 21145507 02/04

Page 18

Use the following assembly instructions if you have a

a 44” steel-framed acrylic backboard.

3A. Assemble backboard brackets to board as shown.

Refer To

Instructions

Included With

Backboard

Hardware For Board

Assembly.

NOTE: Parts on this page are included in backboard mounting hardware.

P/N 21145507 02/04

18

Image 18
Contents Inground System Before YOU Start U.S.1-800-558-5234 and Canada Safety Instructions Warranty Card Parts List See Hardware Identifier Hardware Identifier Bolts & Screws Section a Assemble the Pole TOP Middle FIG. a Keep flange pushed down To concrete and leveled Taped reference marks 02/04 Side Access Section B Assemble the Backboard To Elevator Tubes 21145507 02/04 02/04 21145507 02/04 Surface of acrylic 21145507 02/04 Section C Attach the BACKBOARD/ELEVATOR To Pole System 21145507 02/04 USE EYE Protection When Installing Springs Install clips Insert net into bottom of clip as shown Use wedge to tap cap of ground sleeve until tight 24A 10 ft 05 m