Huffy Sports Basketball Systems manual 24A

Page 27

24A.

Starting with nuts flush against bracket, secure rim and bracket to backboard.

NOTE A: Do not use washers here on spring return style rim.

1

WARNING

41

TWO PERSON MINIMUM REQUIRED

FOR THIS PROCEDURE. NOT

FOLLOWING RECOMMENDATION

MAY RESULT IN SERIOUS BODILY

INJURY AND/OR PROPERTY

DAMAGE.

 

 

 

WARNING

 

Note A

 

 

 

 

 

WHEN MOUNTING THE

BACKBOARD ASSEMBLY TO

THE POLE IS PERFORMED

AT AN ELEVATED HEIGHT.

USE PROPER PRECAUTION.

IMPORTANT!

Refer to instructions

included with board and rim hardware for backboard and rim assembly,

24B.

Starting with nuts flush against bracket, secure rim and bracket to backboard.

NOTE A: Do not use washers here on spring return style rim.

WARNING

41

TWO PERSON MINIMUM REQUIRED

 

FOR THIS PROCEDURE. NOT

 

FOLLOWING RECOMMENDATION

 

MAY RESULT IN SERIOUS BODILY

 

INJURY AND/OR PROPERTY

 

DAMAGE.

 

WARNING

WHEN MOUNTING THE

BACKBOARD ASSEMBLY TO

THE POLE IS PERFORMED

AT AN ELEVATED HEIGHT.

USE PROPER PRECAUTION.

Note A

IMPORTANT!

Refer to instructions

included with board and rim hardware for backboard and rim assembly,

27

02/04

P/N 21145507

Image 27
Contents Inground System Before YOU Start U.S.1-800-558-5234 and Canada Safety Instructions Warranty Card Parts List See Hardware Identifier Hardware Identifier Bolts & Screws Section a Assemble the Pole TOP Middle FIG. a Keep flange pushed down To concrete and leveled Taped reference marks 02/04 Side Access Section B Assemble the Backboard To Elevator Tubes 21145507 02/04 02/04 21145507 02/04 Surface of acrylic 21145507 02/04 Section C Attach the BACKBOARD/ELEVATOR To Pole System 21145507 02/04 USE EYE Protection When Installing Springs Install clips Insert net into bottom of clip as shown Use wedge to tap cap of ground sleeve until tight 24A 10 ft 05 m