Huffy Sports Basketball Systems manual 21145507 02/04

Page 20

Use the following assembly instructions if you have a

48” molded plastic-framed acrylic backboard.

Install spacers (25), and springs (39) onto backboard

4A. brackets (26) with bolts (27, 36), washers (37) and lock-nuts (14, 28) as shown. Bend bracket (26) to line up with holes in backboard.

28 26

14

25

27

12

4B. Assemble elevator tubes (30) as shown. Tighten completely.

IMPORTANT!:

29

26

32

31

29

33

33

35

32

35

It is necessary for all parts to be instaslled for this mechanism to work safely and properly.

30

31

39 30

P/N 21145507 02/04

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Inground System Before YOU Start U.S.1-800-558-5234 and Canada Safety Instructions Warranty Card Parts List See Hardware Identifier Hardware Identifier Bolts & Screws Section a Assemble the Pole TOP Middle FIG. a Keep flange pushed down To concrete and leveled Taped reference marks 02/04 Side Access Section B Assemble the Backboard To Elevator Tubes 21145507 02/04 02/04 21145507 02/04 Surface of acrylic 21145507 02/04 Section C Attach the BACKBOARD/ELEVATOR To Pole System 21145507 02/04 USE EYE Protection When Installing Springs Install clips Insert net into bottom of clip as shown Use wedge to tap cap of ground sleeve until tight 24A 10 ft 05 m
Top Page Image Contents