Spalding M8872411 Apply height indicator labels 32 & 31 to height indicators, Shown by tapping

Page 15

14.

A.

Apply height indicator labels (32 & 31) to height indicators (30).

Set-up For Left Side

30

10 9 8 7

10 9 8 7

32

Set-up For Right Side

30

7 8 9 10

7	8 9 10	31

Attach height indicators to lower yoke in area shown by turning B. screws (29) into place with a Phillips head screwdriver. Apply name

plate sticker (27) to lower yoke as shown.

29	10	9	8 7
		9

27

IMPORTANT!

NOTE ORIENTATION

OF HEIGHT

INDICATORS:

10’ MARK SHOULD FACE AWAY FROM BACKBOARD.

C	Attach height indicators
	to lower yoke in area
	shown by tapping
	screws (29) into place
	with a rubber mallet.
	Apply name plate
	sticker (27) to lower
	yoke as shown.

27

15.	Install net (4) to rim as shown.

			0
		1
7	8	9
	8

29

1.

2.

3.

4.

15

09/05

ID# M8872411

Image 15

Contents High End Residential In-Ground Basketball System Safety Instructions Parts List Hardware Identifier Bolts & Screws Make sure nuts 25 are 2.75 7 cm from top of J-bolts Build drainage hill Side V IEWShown Insert bushings 38 into areasMounting plate 2 as shown Playing SurfaceCompleted Assembly ID# M8872411 09/05 Lower yoke Attach elevator adjustment 12 toAttach elevator adjustment 12 to pole bracket First attach board 10 to upper yoke Using TWO people to hold the boardAttach backboard 10 to upper and lower Yokes 18End of the rod 14 as shown Figure a To lower yoke in area Apply height indicator labels 32 & 31 to height indicatorsAttach height indicators Install net 4 to rim as shownNing 09/05 ID# M8872411 Should be level in all directions Check system leveling. PoleLimited Lifetime Warranty