JVC FS-X1, FS-X3 Tone Control BASS/TREBLE, No signal condition, To disable the A.P.off function

Page 15

Basic Operations

English

Tone Control (BASS/TREBLE)

You can control the tone by changing the bass (low frequen- cy) and treble (high frequency).

On the Remote Control

1 Press the BASS/TREBLE button.

Each time you press the button, the Tone Control mode changes as follows.

BASS = TREBLE = Normal display = (back to the beginning)

No signal condition:

Source CD: CD is stopped or no CD is inserted.

When no signal condition continues, “A.P.off 20 sec” (20 seconds left before elapsed time reaches three minutes) ap- pears on the display. The displayed time is counted down and, finally, the System is turned off (Standby mode).

•If a CD is played back, the “A.P.off” indicator stops blinking and stays lit again.

•If you press a button or turn the VOLUME control, three-minute counting down is reset and counting down newly restarts.

To disable the A.P.off function

2 While “BASS” or “TREBLE” appears on

When the source is “CD”, press the A.P.off button on the

the display, press the VOLUME + or -

Remote Control until “A.P.off STOP” appears on the dis-

button to adjust the bass or treble level.

play.

Then, the “A.P.off” indicator goes out.

You can change the level within the range of -5 to +5. (0: flat)

 

 

 

3 Press the BASS/TREBLE button until normal display appears.

Waiting for five seconds will also return the System to the normal display.

Auto Power Off (A.P.off)

You can automatically turn off the System when no signal condition continues for three minutes. This function is ef- fective when the source is set to “CD”, but not to “FM”, “AM” or “ LINE”.

Entering the Number with the Remote Control (Numeric Keys)

You will use the Numeric Keys on the Remote Control to enter numbers for presetting stations, recalling the preset stations, selecting track number, or programming the play- ing tracks on a CD.

How to enter the number with the Numeric Keys is ex- plained here.

Examples:

•To enter number 5, press 5.

•To enter number 10, press 10.

•To enter number 15, press +10 then 5.

•To enter number 20, press +10 then 10.

•To enter number 25, press +10, +10, then 5.

To Enable the A.P.off function (When the source is “CD”)

1 Press the A.P.off button on the Remote Control until “A.P.off SET” appears on the display.

Then, the “A.P.off” indicator lights up on the display.

•Each time you press the button, the display alternates as follows.

A.P.off SET Ô A.P.off STOP

When no signal condition is detected, the “A.P.off” indica- tor will start blinking soon.

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents FS-X1/FS-X3 Important for Laser Products Front view Side view Features IntroductionHow This Manual Is Organized Table of Contents Troubleshooting Care And Maintenance Specifications Getting Started AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlConnecting the FM Antenna Using the Supplied Wire AntennaUsing the Coaxial Type Connector Not Supplied Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 When attaching the speaker grills Connecting a Powered SubwooferConnecting an External Equipment When removingAutomatic Power On Connecting an MD Recorder, etc Optical Digital OutputTurning the Power On and Off Basic OperationsChanging the Source Fade-out Muting Fade Muting Adjusting the Brightness Dimmer at Power OnPower Saving Mode Dimmer at Power Off Adjusting the VolumeEntering the Number with the Remote Control Numeric Keys No signal conditionTo disable the A.P.off function Auto Power Off A.P.offOne Touch Radio Using the TunerTuning In a Station Select a station using one of the follow- ing methodsPress the SET button within 5 seconds Presetting StationsTo Change the FM Reception Mode To change the preset stations, repeat the sameBeat Cut AM Reception Quickest Way To Start a CD Is With the One Touch Operation Using the CD PlayerWhen playing a CD-R or CD-RW To Insert a CDBasics of Using the CD Player Normal Play To Unload a CDProgramming the Playing Order of the Tracks Program Play Repeat to program the other tracks Press the CD 6button on the Remote ControlTo Modify the Program Random PlayTurn off the system Repeating TracksLocking the CD door Unlocking the CD doorTo exit the source LINE, select other source e.g. CD Using External EquipmentsListening to External Equipment Changing the Equipment’s NameRecording the System’s Source to External Equipment Adjusting the Input LevelPress the 3 or 2 button to set the hour Using the TimersSetting the Clock Press the CLOCK/TIMER buttonCorrecting the Clock Setting the Daily TimerPerform steps 2 to 5 in Setting the Clo- ck on Showing the Clock DisplaySetting the on time Example Setting the OFF time ExampleSelecting the music source Select the Fade function Turning the Daily Timer On and OffSetting the volume level Press the Cancel buttonWait for a few seconds Setting the Sleep TimerTimer Priority During playback a source, press the Sleep buttonAction TroubleshootingSymptom Possible CauseCare And Maintenance Specifications EN, CS 0403MNMCREJEM Victor Company of JAPAN, Limited Instructions Precaución Front view Vista frontal Visão frontal Introduction Table of Contents Troubleshooting Care And Maintenance Specifications Getting Started Connecting the FM Antenna Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 Removing the Speaker Grills SP-FSX1 Compu Play Volume + STANDBY/ON Adjusting the Brightness Dimmer at Power On Tone Control BASS/TREBLE Using the Tuner Presetting Stations Beat Cut AM Reception Source Selector Disc indicator CD door To Unload a CD Random Play CD Door Lock Using External Equipments Recording the System’s Source to External Equipment Using the Timers Showing the Clock Display Using the Timers Turning the Daily Timer On and Off Setting the Sleep Timer Troubleshooting Care And Maintenance Specifications EN, SP, PR 0503MNMCREJEM Victor Company of JAPAN, Limited

FS-X1, FS-X3 specifications

JVC has long been recognized as a key player in the consumer electronics sector, particularly in audio and video technology. Among its noteworthy products are the JVC FS-X1 and FS-X3, two speaker systems designed to deliver impressive sound quality and performance for various audio applications.

The JVC FS-X1 is positioned as a compact and versatile speaker option suitable for smaller spaces or as part of a multi-room audio setup. It features a well-engineered two-way design that includes a high-quality woofer and a dome tweeter. This combination ensures a balanced sound profile, making it ideal for listening to a range of music genres. With a frequency response that captures both low-end punch and crisp high notes, the FS-X1 is tailored for audiophiles and casual listeners alike.

One of the standout technologies employed in the FS-X1 is its advanced cabinet design, which minimizes unwanted vibrations and ensures clean sound reproduction. Additionally, the speaker integrates JVC's proprietary audio processing technologies, enhancing overall clarity and detail. This model is particularly user-friendly, with a variety of input options, including standard wire connections, allowing it to be easily integrated into existing audio setups.

On the other hand, the JVC FS-X3 builds upon the foundation of the FS-X1 while offering enhanced features for discerning users. This speaker system boasts a larger woofer, which contributes to improved bass response and a more robust overall soundstage. The FS-X3 is designed for those who prioritize sound depth and are looking for a speaker that can handle more demanding audio tracks.

Key features of the FS-X3 include an upgraded crossover network, which ensures a smooth transition between the woofer and tweeter frequencies. The design also focuses on aesthetics, featuring a stylish finish that can seamlessly blend into various home environments. Like its counterpart, the FS-X3 is equipped with multiple connectivity options for user convenience.

In summary, the JVC FS-X1 and FS-X3 are outstanding offerings in the world of audio equipment. The FS-X1 serves as an excellent entry-level choice for casual listeners, while the FS-X3 caters to those seeking superior sound performance. Both models embody JVC's commitment to delivering quality, versatility, and cutting-edge technology to enhance the listening experience at home or in any audio setup.
Top Page Image Contents