JVC FS-X3, FS-X1 manual Specifications

Page 32

English

Specifications

CA-FSX1/CA-FSX3

 

Amplifier

:60 W (30 W + 30 W) at 4 Ω(10% THD)

Output Power

Input Sensitivity/

 

Impedance (1 kHz)

:210 mV/51 kΩ (LEVEL 1)

LINE IN

 

520 mV/51 kΩ (LEVEL 2)

Output Sensitivity/

 

Impedance (1 kHz)

:600 mV/5.1 kΩ

LINE OUT

OPTICAL DIGITAL

:–23 dBm - –15 dBm

OUT

:MIN. 4 Ω

Speaker terminals

Subwoofer out

:220 mV/4.9 kΩ

Phones

:16 Ω - 1 kΩ

CD Player

Signal-To-Noise Ratio:95 dB

Wow And Flutter

:Unmeasurable

Tuner

 

FM Tuner

 

Tuning Range

:87.50 MHz - 108.00 MHz

AM Tuner

 

Tuning Range

:531 kHz - 1 710 kHz

 

(at 9 kHz interval space)

 

:530 kHz - 1 710 kHz

 

(at 10 kHz interval space)

Power Specifications

Power Requirements

:AC 110 - 230 V , 50/60 Hz

Power Consumption

 

For 110 V

:20 W (power on mode)

 

1.2 W (on Standby: with display off)

 

4.5 W (on Standby: with display on)

For 230 V

:22 W (power on mode)

 

2.0 W (on Standby: with display off)

 

7.0 W (on Standby: with display on)

Center Unit

 

Dimensions

:160 mm ✕ 130 mm ✕ 242 mm (W/H/D)

Mass

:Approx. 2.3 kg

Speaker Specifications (each unit)

SP-FSX1

Type

:1-Way Bass-reflex type

Speaker

:8.0 cm cone ✕ 1

Power Handling

 

Capacity

:30 W

Impedance

:4 Ω

Frequency Range

:55 Hz - 20 000 Hz

Sound Pressure Level :81 dB/W·m

Dimensions

:114 mm ✕ 176 mm ✕ 174 mm (W/H/D)

Mass

:Approx. 1.3 kg each

SP-FSX3

 

Type

:2-Way Bass-reflex type

Speaker

 

Woofer

:10.0 cm cone ✕ 1

Tweeter

:2.0 cm dome ✕ 1

Power Handling

:30 W

Capacity

Impedance

:4 Ω

Frequency Range

:55 Hz - 40 000 Hz

Sound Pressure Level :85 dB/W·m

Dimensions

:147 mm ✕ 246 mm ✕ 210 mm (W/H/D)

Mass

:Approx. 2.4 kg each

Accessories

FM Wire Antenna (1)

AM Loop Antenna (1)

Remote Control (1)

Batteries (2)

Speaker Cords (2)

AC plug adaptor (1)

Design and specifications are subject to change without notice.

29

Page 31 Page 33
Image 32
Page 31 Page 33
Contents FS-X1/FS-X3 Important for Laser Products Front view Side view How This Manual Is Organized FeaturesIntroduction Table of Contents Troubleshooting Care And Maintenance Specifications Accessories How To Put Batteries In the Remote ControlUsing the Remote Control Getting StartedUsing the Coaxial Type Connector Not Supplied Connecting the FM AntennaUsing the Supplied Wire Antenna Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 Connecting a Powered Subwoofer Connecting an External EquipmentWhen removing When attaching the speaker grillsConnecting an MD Recorder, etc Optical Digital Output Automatic Power OnChanging the Source Turning the Power On and OffBasic Operations Adjusting the Brightness Dimmer at Power On Power Saving Mode Dimmer at Power OffAdjusting the Volume Fade-out Muting Fade MutingNo signal condition To disable the A.P.off functionAuto Power Off A.P.off Entering the Number with the Remote Control Numeric KeysUsing the Tuner Tuning In a StationSelect a station using one of the follow- ing methods One Touch RadioPresetting Stations To Change the FM Reception ModeTo change the preset stations, repeat the same Press the SET button within 5 secondsBeat Cut AM Reception Using the CD Player When playing a CD-R or CD-RWTo Insert a CD Quickest Way To Start a CD Is With the One Touch OperationProgramming the Playing Order of the Tracks Program Play Basics of Using the CD Player Normal PlayTo Unload a CD Press the CD 6button on the Remote Control To Modify the ProgramRandom Play Repeat to program the other tracksRepeating Tracks Locking the CD doorUnlocking the CD door Turn off the systemUsing External Equipments Listening to External EquipmentChanging the Equipment’s Name To exit the source LINE, select other source e.g. CDAdjusting the Input Level Recording the System’s Source to External EquipmentUsing the Timers Setting the ClockPress the CLOCK/TIMER button Press the 3 or 2 button to set the hourSetting the Daily Timer Perform steps 2 to 5 in Setting the Clo- ck onShowing the Clock Display Correcting the ClockSelecting the music source Setting the on time ExampleSetting the OFF time Example Turning the Daily Timer On and Off Setting the volume levelPress the Cancel button Select the Fade functionSetting the Sleep Timer Timer PriorityDuring playback a source, press the Sleep button Wait for a few secondsTroubleshooting SymptomPossible Cause ActionCare And Maintenance Specifications EN, CS 0403MNMCREJEM Victor Company of JAPAN, Limited Instructions Precaución Front view Vista frontal Visão frontal Introduction Table of Contents Troubleshooting Care And Maintenance Specifications Getting Started Connecting the FM Antenna Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 Removing the Speaker Grills SP-FSX1 Compu Play Volume + STANDBY/ON Adjusting the Brightness Dimmer at Power On Tone Control BASS/TREBLE Using the Tuner Presetting Stations Beat Cut AM Reception Source Selector Disc indicator CD door To Unload a CD Random Play CD Door Lock Using External Equipments Recording the System’s Source to External Equipment Using the Timers Showing the Clock Display Using the Timers Turning the Daily Timer On and Off Setting the Sleep Timer Troubleshooting Care And Maintenance Specifications EN, SP, PR 0503MNMCREJEM Victor Company of JAPAN, Limited

FS-X1, FS-X3 specifications

JVC has long been recognized as a key player in the consumer electronics sector, particularly in audio and video technology. Among its noteworthy products are the JVC FS-X1 and FS-X3, two speaker systems designed to deliver impressive sound quality and performance for various audio applications.

The JVC FS-X1 is positioned as a compact and versatile speaker option suitable for smaller spaces or as part of a multi-room audio setup. It features a well-engineered two-way design that includes a high-quality woofer and a dome tweeter. This combination ensures a balanced sound profile, making it ideal for listening to a range of music genres. With a frequency response that captures both low-end punch and crisp high notes, the FS-X1 is tailored for audiophiles and casual listeners alike.

One of the standout technologies employed in the FS-X1 is its advanced cabinet design, which minimizes unwanted vibrations and ensures clean sound reproduction. Additionally, the speaker integrates JVC's proprietary audio processing technologies, enhancing overall clarity and detail. This model is particularly user-friendly, with a variety of input options, including standard wire connections, allowing it to be easily integrated into existing audio setups.

On the other hand, the JVC FS-X3 builds upon the foundation of the FS-X1 while offering enhanced features for discerning users. This speaker system boasts a larger woofer, which contributes to improved bass response and a more robust overall soundstage. The FS-X3 is designed for those who prioritize sound depth and are looking for a speaker that can handle more demanding audio tracks.

Key features of the FS-X3 include an upgraded crossover network, which ensures a smooth transition between the woofer and tweeter frequencies. The design also focuses on aesthetics, featuring a stylish finish that can seamlessly blend into various home environments. Like its counterpart, the FS-X3 is equipped with multiple connectivity options for user convenience.

In summary, the JVC FS-X1 and FS-X3 are outstanding offerings in the world of audio equipment. The FS-X1 serves as an excellent entry-level choice for casual listeners, while the FS-X3 caters to those seeking superior sound performance. Both models embody JVC's commitment to delivering quality, versatility, and cutting-edge technology to enhance the listening experience at home or in any audio setup.
Top Page Image Contents