JVC FS-X3, FS-X1 manual Care And Maintenance

Page 64

Care And Maintenance

Handle your CDs carefully, and they will last a long time.

Compact Discs

• Only CDs bearing these marks can be used with this System. However, continued use of irregu- lar shape CDs (heart-shape, octagonal, etc.) can damage the System.

Remove the CD from its case by

holding it at the edges while press- ing the case’s center hole lightly.

• Do not touch the shiny surface of the CD, or bend the CD.

Put the CD back in its case after use to prevent warping.

• Be careful not to scratch the sur- face of the CD when placing it back in the case.

Avoid exposure to direct sunlight, temperature extremes, and moisture.

• A dirty CD may not play cor- rectly. If a CD does become dirty, wipe it with a soft cloth in a straight line from center to edge.

CAUTION:

Do not use any solvent (for example, con- ventional record cleaner, spray thinner, benzine, etc.) to clean a CD.

General Notes

In general, you will have the best performance by keeping your CDs and the mechanism clean.

Store CDs in their cases, and keep them in cabinets or on shelves.

Keep the System’s CD door closed when not in use.

Cleaning the Unit

Stains on the Unit

Should be wiped off with a soft cloth. If the Unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

Since the Unit may deteriorate in quality, become damaged or get its paint peeled off, be careful about the followings.

-DO NOT wipe it with a hard cloth.

-DO NOT wipe it strong.

-DO NOT wipe it with thinner or benzine.

-DO NOT apply any volatile substance such as insecti- cides to it.

-DO NOT allow any rubber or plastic to remain in con- tact with it for a long time.

Cleaning the Lens

If the lens in the CD pickup is dirty, dropout, etc., could de- grade sound.

Open the CD door and clean the lens as shown.

Use a blower (available from a camera store) to blow dust off the lens.

Blower

Lens

If there are fingerprints, etc. on the lens, gently wipe clean with a cotton swab.

Moisture Condensation

Moisture may condense on the lens inside the System in the following cases:

• After turning on heating in the room.

• In a damp room.

If the System is brought directly

from a cold to a warm place. Should this occur, the System may malfunction. In this case, leave the System turned on for a few hours un- til the moisture evaporates, unplug the AC power cord, and then plug it in again.

English

28

Image 64
Contents FS-X1/FS-X3 Important for Laser Products Front view Side view Introduction FeaturesHow This Manual Is Organized Table of Contents Troubleshooting Care And Maintenance Specifications Accessories How To Put Batteries In the Remote ControlUsing the Remote Control Getting StartedUsing the Supplied Wire Antenna Connecting the FM AntennaUsing the Coaxial Type Connector Not Supplied Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 Connecting a Powered Subwoofer Connecting an External EquipmentWhen removing When attaching the speaker grillsConnecting an MD Recorder, etc Optical Digital Output Automatic Power OnBasic Operations Turning the Power On and OffChanging the Source Adjusting the Brightness Dimmer at Power On Power Saving Mode Dimmer at Power OffAdjusting the Volume Fade-out Muting Fade MutingNo signal condition To disable the A.P.off functionAuto Power Off A.P.off Entering the Number with the Remote Control Numeric KeysUsing the Tuner Tuning In a StationSelect a station using one of the follow- ing methods One Touch RadioPresetting Stations To Change the FM Reception ModeTo change the preset stations, repeat the same Press the SET button within 5 secondsBeat Cut AM Reception Using the CD Player When playing a CD-R or CD-RWTo Insert a CD Quickest Way To Start a CD Is With the One Touch OperationTo Unload a CD Basics of Using the CD Player Normal PlayProgramming the Playing Order of the Tracks Program Play Press the CD 6button on the Remote Control To Modify the ProgramRandom Play Repeat to program the other tracksRepeating Tracks Locking the CD doorUnlocking the CD door Turn off the systemUsing External Equipments Listening to External EquipmentChanging the Equipment’s Name To exit the source LINE, select other source e.g. CDAdjusting the Input Level Recording the System’s Source to External EquipmentUsing the Timers Setting the ClockPress the CLOCK/TIMER button Press the 3 or 2 button to set the hourSetting the Daily Timer Perform steps 2 to 5 in Setting the Clo- ck onShowing the Clock Display Correcting the ClockSetting the OFF time Example Setting the on time ExampleSelecting the music source Turning the Daily Timer On and Off Setting the volume levelPress the Cancel button Select the Fade functionSetting the Sleep Timer Timer PriorityDuring playback a source, press the Sleep button Wait for a few secondsTroubleshooting SymptomPossible Cause ActionCare And Maintenance Specifications EN, CS 0403MNMCREJEM Victor Company of JAPAN, Limited Instructions Precaución Front view Vista frontal Visão frontal Introduction Table of Contents Troubleshooting Care And Maintenance Specifications Getting Started Connecting the FM Antenna Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 Removing the Speaker Grills SP-FSX1 Compu Play Volume + STANDBY/ON Adjusting the Brightness Dimmer at Power On Tone Control BASS/TREBLE Using the Tuner Presetting Stations Beat Cut AM Reception Source Selector Disc indicator CD door To Unload a CD Random Play CD Door Lock Using External Equipments Recording the System’s Source to External Equipment Using the Timers Showing the Clock Display Using the Timers Turning the Daily Timer On and Off Setting the Sleep Timer Troubleshooting Care And Maintenance Specifications EN, SP, PR 0503MNMCREJEM Victor Company of JAPAN, Limited

FS-X1, FS-X3 specifications

JVC has long been recognized as a key player in the consumer electronics sector, particularly in audio and video technology. Among its noteworthy products are the JVC FS-X1 and FS-X3, two speaker systems designed to deliver impressive sound quality and performance for various audio applications.

The JVC FS-X1 is positioned as a compact and versatile speaker option suitable for smaller spaces or as part of a multi-room audio setup. It features a well-engineered two-way design that includes a high-quality woofer and a dome tweeter. This combination ensures a balanced sound profile, making it ideal for listening to a range of music genres. With a frequency response that captures both low-end punch and crisp high notes, the FS-X1 is tailored for audiophiles and casual listeners alike.

One of the standout technologies employed in the FS-X1 is its advanced cabinet design, which minimizes unwanted vibrations and ensures clean sound reproduction. Additionally, the speaker integrates JVC's proprietary audio processing technologies, enhancing overall clarity and detail. This model is particularly user-friendly, with a variety of input options, including standard wire connections, allowing it to be easily integrated into existing audio setups.

On the other hand, the JVC FS-X3 builds upon the foundation of the FS-X1 while offering enhanced features for discerning users. This speaker system boasts a larger woofer, which contributes to improved bass response and a more robust overall soundstage. The FS-X3 is designed for those who prioritize sound depth and are looking for a speaker that can handle more demanding audio tracks.

Key features of the FS-X3 include an upgraded crossover network, which ensures a smooth transition between the woofer and tweeter frequencies. The design also focuses on aesthetics, featuring a stylish finish that can seamlessly blend into various home environments. Like its counterpart, the FS-X3 is equipped with multiple connectivity options for user convenience.

In summary, the JVC FS-X1 and FS-X3 are outstanding offerings in the world of audio equipment. The FS-X1 serves as an excellent entry-level choice for casual listeners, while the FS-X3 caters to those seeking superior sound performance. Both models embody JVC's commitment to delivering quality, versatility, and cutting-edge technology to enhance the listening experience at home or in any audio setup.