JVC FS-X3, FS-X1 manual Random Play

Page 54

Using the CD Player

5 Press the Numeric Keys to enter the track number you want to program (See page 12).

The program order number will be assigned from “1”, if nothing is programmed yet.

Example:

Track number

Program order number

•If the total playback time of the programmed tracks ex- ceeds 1 hour and 40 minutes, “--:--” will appear on the dis- play.

•If you try to program the 33rd track, “MEMORY FULL” ap- pears on the display for about 2 seconds.

English

(After a few seconds)

Total playback time of the programmed tracks

•To delete the last entry, press the CANCEL button.

6 Repeat step 5 to program the other tracks.

You can see the total playback time of programmed tracks on the display.

7 Press the CD 6button.

The System plays the tracks in the order you have pro- grammed them.

The CD will stop when all of the programmed tracks have been finished playing.

•You can also press the 6 button on the Unit.

❑You can skip to a particular program track by pressing the 3or 2button on the Remote Control or the ¢or 4 button on the Unit during Program Play.

❑You can perform search play by holding down the ¢or 4 button on the Unit or the 5 or ∞ button on the Re- mote Control during playback.

❑To stop playing, press the 7 button once.

To confirm the programmed tracks while the CD player is stopped, each time you press the 3 or 2 but- ton, the tracks making up the program will successively be displayed in the programmed order.

To delete all the tracks in the program, in Stop mode, hold down the CANCEL button until “ALL CLEAR!” ap- pears on the display.

Opening the CD door or turning off the System will clear the programmed tracks and release the Program Play mode. To exit the Program Play mode once, while the CD Player is stopped, Press the FM/PLAY MODE button until “CD NORMAL” appears on the display. (The “PRGM” in- dicator goes out.)

To re-enter the Program Play mode, press the FM/ PLAY MODE button until “CD PROGRAM” appears on the display. (The “PRGM” indicator lights up.)

To Modify the Program

Modify the contents of the program while the CD Player is stopped.

Each time you press the CANCEL button, the last track in the program is deleted. To add new tracks to the end of the program, repeat above step 5.

Random Play

The tracks will play in no special order when you use this mode.

1 In Stop mode, press the FM/PLAY MODE button on the Remote Control until “CD RANDOM” appears.

The “RANDOM” indicator lights up on the display. Each time you press the button, the play mode changes as follows.

CD PROGRAM =CD RANDOM =CD NORMAL =(back to the beginning)

2 Press the CD 6button on the Remote

Control.

The tracks are played in random order.

The CD will stop when all the tracks have been finished playing.

•You can also press the 6 button on the Unit.

To skip a track during playback, press the ¢ (or 3) button to jump to the next track in the random sequence. Press the 4 (or 2) button to jump back to the start of a track being played.

To perform search play during playback, hold down the ¢ (or 5) or the 4 (or ∞) button.

To exit the Random Play mode, while the CD Player is stopped, press the FM/PLAY MODE button until “CD NORMAL” appears on the display. (The “RANDOM” in- dicator goes out.)

18

Page 53 Page 55
Image 54
Page 53 Page 55
Contents FS-X1/FS-X3 Important for Laser Products Front view Side view Features IntroductionHow This Manual Is Organized Table of Contents Troubleshooting Care And Maintenance Specifications Using the Remote Control AccessoriesHow To Put Batteries In the Remote Control Getting StartedConnecting the FM Antenna Using the Supplied Wire AntennaUsing the Coaxial Type Connector Not Supplied Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 When removing Connecting a Powered SubwooferConnecting an External Equipment When attaching the speaker grillsConnecting an MD Recorder, etc Optical Digital Output Automatic Power OnTurning the Power On and Off Basic OperationsChanging the Source Adjusting the Volume Adjusting the Brightness Dimmer at Power OnPower Saving Mode Dimmer at Power Off Fade-out Muting Fade MutingAuto Power Off A.P.off No signal conditionTo disable the A.P.off function Entering the Number with the Remote Control Numeric KeysSelect a station using one of the follow- ing methods Using the TunerTuning In a Station One Touch RadioTo change the preset stations, repeat the same Presetting StationsTo Change the FM Reception Mode Press the SET button within 5 secondsBeat Cut AM Reception To Insert a CD Using the CD PlayerWhen playing a CD-R or CD-RW Quickest Way To Start a CD Is With the One Touch OperationBasics of Using the CD Player Normal Play To Unload a CDProgramming the Playing Order of the Tracks Program Play Random Play Press the CD 6button on the Remote ControlTo Modify the Program Repeat to program the other tracksUnlocking the CD door Repeating TracksLocking the CD door Turn off the systemChanging the Equipment’s Name Using External EquipmentsListening to External Equipment To exit the source LINE, select other source e.g. CDAdjusting the Input Level Recording the System’s Source to External EquipmentPress the CLOCK/TIMER button Using the TimersSetting the Clock Press the 3 or 2 button to set the hourShowing the Clock Display Setting the Daily TimerPerform steps 2 to 5 in Setting the Clo- ck on Correcting the ClockSetting the on time Example Setting the OFF time ExampleSelecting the music source Press the Cancel button Turning the Daily Timer On and OffSetting the volume level Select the Fade functionDuring playback a source, press the Sleep button Setting the Sleep TimerTimer Priority Wait for a few secondsPossible Cause TroubleshootingSymptom ActionCare And Maintenance Specifications EN, CS 0403MNMCREJEM Victor Company of JAPAN, Limited Instructions Precaución Front view Vista frontal Visão frontal Introduction Table of Contents Troubleshooting Care And Maintenance Specifications Getting Started Connecting the FM Antenna Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 Removing the Speaker Grills SP-FSX1 Compu Play Volume + STANDBY/ON Adjusting the Brightness Dimmer at Power On Tone Control BASS/TREBLE Using the Tuner Presetting Stations Beat Cut AM Reception Source Selector Disc indicator CD door To Unload a CD Random Play CD Door Lock Using External Equipments Recording the System’s Source to External Equipment Using the Timers Showing the Clock Display Using the Timers Turning the Daily Timer On and Off Setting the Sleep Timer Troubleshooting Care And Maintenance Specifications EN, SP, PR 0503MNMCREJEM Victor Company of JAPAN, Limited

FS-X1, FS-X3 specifications

JVC has long been recognized as a key player in the consumer electronics sector, particularly in audio and video technology. Among its noteworthy products are the JVC FS-X1 and FS-X3, two speaker systems designed to deliver impressive sound quality and performance for various audio applications.

The JVC FS-X1 is positioned as a compact and versatile speaker option suitable for smaller spaces or as part of a multi-room audio setup. It features a well-engineered two-way design that includes a high-quality woofer and a dome tweeter. This combination ensures a balanced sound profile, making it ideal for listening to a range of music genres. With a frequency response that captures both low-end punch and crisp high notes, the FS-X1 is tailored for audiophiles and casual listeners alike.

One of the standout technologies employed in the FS-X1 is its advanced cabinet design, which minimizes unwanted vibrations and ensures clean sound reproduction. Additionally, the speaker integrates JVC's proprietary audio processing technologies, enhancing overall clarity and detail. This model is particularly user-friendly, with a variety of input options, including standard wire connections, allowing it to be easily integrated into existing audio setups.

On the other hand, the JVC FS-X3 builds upon the foundation of the FS-X1 while offering enhanced features for discerning users. This speaker system boasts a larger woofer, which contributes to improved bass response and a more robust overall soundstage. The FS-X3 is designed for those who prioritize sound depth and are looking for a speaker that can handle more demanding audio tracks.

Key features of the FS-X3 include an upgraded crossover network, which ensures a smooth transition between the woofer and tweeter frequencies. The design also focuses on aesthetics, featuring a stylish finish that can seamlessly blend into various home environments. Like its counterpart, the FS-X3 is equipped with multiple connectivity options for user convenience.

In summary, the JVC FS-X1 and FS-X3 are outstanding offerings in the world of audio equipment. The FS-X1 serves as an excellent entry-level choice for casual listeners, while the FS-X3 caters to those seeking superior sound performance. Both models embody JVC's commitment to delivering quality, versatility, and cutting-edge technology to enhance the listening experience at home or in any audio setup.
Top Page Image Contents