JVC FS-X3, FS-X1 manual To Unload a CD, Basics of Using the CD Player Normal Play

Page 20

English

Using the CD Player

❑You can insert a CD while listening to the other source.

•However, while the CD door is operating (opening or closing), the other source will be muted.

CAUTION:

•DO NOT try to open or close the CD door by hands as it will be damaged.

To Unload a CD

Take out the CD as shown below.

Basics of Using the CD Player

– Normal Play

To Select a Track or Passage within a Track

During playback

Press the ¢ or 4 button on the Unit or the 3 or 2 but- ton on the Remote Control to select the track you want.

•The selected track starts playing.

•Press the ¢ (or 3) button once to skip to the beginning of the next track.

•Press the 4 (or 2) button to skip to the beginning of the track being played. Press twice quickly to skip to the beginning of the previous track.

•When the 3 or 2 button on the Remote Control is kept pressing, the track continuously skips.

•Press the Numeric Keys to select truck number (See page 12).

In Stop mode

•Press the ¢ or 4 (or 3 or 2) button to skip the track.

•Hold down the ¢ or 4 (or 3 or 2 ) button to continuously skip the tracks.

Search Play

Holding down the ¢ or 4 button on the Unit or the 5 or ∞ button on the Remote Control, during playback, will fast forward/backwards the CD so you can quickly find a particular passage in the track you are listening to.

To Play a CD

1 Select the source “CD”.

2 Insert a CD.

3 Press the 6button on the Unit or the CD 6button on the Remote Control.

The first track of the CD begins playing.

Track number

Playback time

•The CD Player automatically stops when the last track of the CD has finished playing.

To stop playing the CD, press the 7 button. The following information for the CD is displayed.

Total track number

Total playback time

To stop playing and remove the CD, press the 0CD button on the Unit or the CD DOOR 0 button on the Re- mote Control to open the CD door.

To pause, press the 6button on the Unit or the CD 6 button on the Remote Control. The playback time blinks on the display.

To cancel pause, press the same button again. Play con- tinues from the point where it was paused.

Programming the Playing Order of the Tracks – Program Play

You can program up to 32 tracks in any desired order in- cluding the same tracks.

❑You can only make a program when the CD Player is stopped.

On the Remote Control

1 Insert a CD.

2 Press the CD 6button.

3 Press the 7 button to stop the CD.

4 Press the FM/PLAY MODE button until “CD PROGRAM” appears.

The System enters the Program Play mode and the “PRGM” indicator lights up.

Each time you press the button, the play mode changes as follows.

CD PROGRAM=CD RANDOM=CD NORMAL= (back to the beginning)

(After a few seconds)

•If already programmed, the track number and preset number of the last programmed track will appear.

17

Page 19 Page 21
Image 20
Page 19 Page 21
Contents FS-X1/FS-X3 Important for Laser Products Front view Side view How This Manual Is Organized FeaturesIntroduction Table of Contents Troubleshooting Care And Maintenance Specifications Accessories How To Put Batteries In the Remote ControlUsing the Remote Control Getting StartedUsing the Coaxial Type Connector Not Supplied Connecting the FM AntennaUsing the Supplied Wire Antenna Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 Connecting a Powered Subwoofer Connecting an External EquipmentWhen removing When attaching the speaker grillsConnecting an MD Recorder, etc Optical Digital Output Automatic Power OnChanging the Source Turning the Power On and OffBasic Operations Adjusting the Brightness Dimmer at Power On Power Saving Mode Dimmer at Power OffAdjusting the Volume Fade-out Muting Fade MutingNo signal condition To disable the A.P.off functionAuto Power Off A.P.off Entering the Number with the Remote Control Numeric KeysUsing the Tuner Tuning In a StationSelect a station using one of the follow- ing methods One Touch RadioPresetting Stations To Change the FM Reception ModeTo change the preset stations, repeat the same Press the SET button within 5 secondsBeat Cut AM Reception Using the CD Player When playing a CD-R or CD-RWTo Insert a CD Quickest Way To Start a CD Is With the One Touch OperationProgramming the Playing Order of the Tracks Program Play Basics of Using the CD Player Normal PlayTo Unload a CD Press the CD 6button on the Remote Control To Modify the ProgramRandom Play Repeat to program the other tracksRepeating Tracks Locking the CD doorUnlocking the CD door Turn off the systemUsing External Equipments Listening to External EquipmentChanging the Equipment’s Name To exit the source LINE, select other source e.g. CDAdjusting the Input Level Recording the System’s Source to External EquipmentUsing the Timers Setting the ClockPress the CLOCK/TIMER button Press the 3 or 2 button to set the hourSetting the Daily Timer Perform steps 2 to 5 in Setting the Clo- ck onShowing the Clock Display Correcting the ClockSelecting the music source Setting the on time ExampleSetting the OFF time Example Turning the Daily Timer On and Off Setting the volume levelPress the Cancel button Select the Fade functionSetting the Sleep Timer Timer PriorityDuring playback a source, press the Sleep button Wait for a few secondsTroubleshooting SymptomPossible Cause ActionCare And Maintenance Specifications EN, CS 0403MNMCREJEM Victor Company of JAPAN, Limited Instructions Precaución Front view Vista frontal Visão frontal Introduction Table of Contents Troubleshooting Care And Maintenance Specifications Getting Started Connecting the FM Antenna Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 Removing the Speaker Grills SP-FSX1 Compu Play Volume + STANDBY/ON Adjusting the Brightness Dimmer at Power On Tone Control BASS/TREBLE Using the Tuner Presetting Stations Beat Cut AM Reception Source Selector Disc indicator CD door To Unload a CD Random Play CD Door Lock Using External Equipments Recording the System’s Source to External Equipment Using the Timers Showing the Clock Display Using the Timers Turning the Daily Timer On and Off Setting the Sleep Timer Troubleshooting Care And Maintenance Specifications EN, SP, PR 0503MNMCREJEM Victor Company of JAPAN, Limited

FS-X1, FS-X3 specifications

JVC has long been recognized as a key player in the consumer electronics sector, particularly in audio and video technology. Among its noteworthy products are the JVC FS-X1 and FS-X3, two speaker systems designed to deliver impressive sound quality and performance for various audio applications.

The JVC FS-X1 is positioned as a compact and versatile speaker option suitable for smaller spaces or as part of a multi-room audio setup. It features a well-engineered two-way design that includes a high-quality woofer and a dome tweeter. This combination ensures a balanced sound profile, making it ideal for listening to a range of music genres. With a frequency response that captures both low-end punch and crisp high notes, the FS-X1 is tailored for audiophiles and casual listeners alike.

One of the standout technologies employed in the FS-X1 is its advanced cabinet design, which minimizes unwanted vibrations and ensures clean sound reproduction. Additionally, the speaker integrates JVC's proprietary audio processing technologies, enhancing overall clarity and detail. This model is particularly user-friendly, with a variety of input options, including standard wire connections, allowing it to be easily integrated into existing audio setups.

On the other hand, the JVC FS-X3 builds upon the foundation of the FS-X1 while offering enhanced features for discerning users. This speaker system boasts a larger woofer, which contributes to improved bass response and a more robust overall soundstage. The FS-X3 is designed for those who prioritize sound depth and are looking for a speaker that can handle more demanding audio tracks.

Key features of the FS-X3 include an upgraded crossover network, which ensures a smooth transition between the woofer and tweeter frequencies. The design also focuses on aesthetics, featuring a stylish finish that can seamlessly blend into various home environments. Like its counterpart, the FS-X3 is equipped with multiple connectivity options for user convenience.

In summary, the JVC FS-X1 and FS-X3 are outstanding offerings in the world of audio equipment. The FS-X1 serves as an excellent entry-level choice for casual listeners, while the FS-X3 caters to those seeking superior sound performance. Both models embody JVC's commitment to delivering quality, versatility, and cutting-edge technology to enhance the listening experience at home or in any audio setup.
Top Page Image Contents