JVC FS-X3, FS-X1 manual Troubleshooting, Symptom, Possible Cause, Action

Page 30

English

Troubleshooting

•If you are having a problem with your System, check this list for a possible solution before calling for service.

•If you cannot solve the problem from the hints given here “ERROR!” appears on the display, or the System has been phys- ically damaged, call a qualified person, such as your dealer, for service.

Symptom

No sound is heard.

Poor radio reception

Stereo effect is lost in FM broadcast.

The CD skips.

The CD does not play.

Unable to operate the Remote Control.

Operations are disabled.

“CD NO DISC” appears.

“CD CAN’T PLAY” appears.

“CD DOOR ERROR” appears.

When the CD door is operating (open- ing or closing) while you are listening to FM, AM or LINE, the source is mut- ed.

Some of the CD functions, such as skip or search, do not work correctly.

Possible Cause

•Connections are incorrect, or loose.

•Headphones are connected.

•The antenna is disconnected.

•The AM Loop Antenna is too close to the System.

•The FM Wire Antenna is not prop- erly extended and positioned.

FM reception mode is changed to “FM MONO”.

•The CD is dirty or scratched.

•Track Skip marks are recorded.

•The CD is upside down.

•Track Skip mark is recorded for the first track of the disc.

•The path between the Remote Con- trol and the sensor on the Unit is blocked.

•The batteries have lost their charge.

The built-in microprocessor has mal- functioned due to external electrical in- terference.

There is no disc loaded.

•You are trying to playback a CD which cannot be played, or there is a problem with the CD.

•The disc has been inserted with its label side down.

The object is blocking the CD door to open.

This is one of the characteristics of this system.

You are playing an unfinalized disc.

Action

•Check all connections and make cor- rections. (See pages 5 to 9.)

•Disconnect the headphones.

•Reconnect the antenna securely.

•Change the position and direction of the AM Loop Antenna.

•Extend FM Wire Antenna to the best reception position.

Press the FM/PLAY MODE button to select “FM AUTO”. (See page 14)

•Clean or replace the CD.

•This is normal.

•Put the CD in with the label side up.

•Wait until the Unit finds a track with- out a Track Skip mark.

•Remove the obstruction.

•Replace the batteries.

Unplug the System then plug it back in.

Insert a disc.

•Change the disc.

•Remove the disc and insert it with the label side up.

Press the 0 CD button to close the CD door and remove the object.

This is normal.

This is normal. If you need to use these functions, finalize the disc. (This Unit cannot finalize CD-R/CD-RW)

27

Page 29 Page 31
Image 30
Page 29 Page 31
Contents FS-X1/FS-X3 Important for Laser Products Front view Side view Features IntroductionHow This Manual Is Organized Table of Contents Troubleshooting Care And Maintenance Specifications Using the Remote Control AccessoriesHow To Put Batteries In the Remote Control Getting StartedConnecting the FM Antenna Using the Supplied Wire AntennaUsing the Coaxial Type Connector Not Supplied Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 When removing Connecting a Powered SubwooferConnecting an External Equipment When attaching the speaker grillsConnecting an MD Recorder, etc Optical Digital Output Automatic Power OnTurning the Power On and Off Basic OperationsChanging the Source Adjusting the Volume Adjusting the Brightness Dimmer at Power OnPower Saving Mode Dimmer at Power Off Fade-out Muting Fade MutingAuto Power Off A.P.off No signal conditionTo disable the A.P.off function Entering the Number with the Remote Control Numeric KeysSelect a station using one of the follow- ing methods Using the TunerTuning In a Station One Touch RadioTo change the preset stations, repeat the same Presetting StationsTo Change the FM Reception Mode Press the SET button within 5 secondsBeat Cut AM Reception To Insert a CD Using the CD PlayerWhen playing a CD-R or CD-RW Quickest Way To Start a CD Is With the One Touch OperationBasics of Using the CD Player Normal Play To Unload a CDProgramming the Playing Order of the Tracks Program Play Random Play Press the CD 6button on the Remote ControlTo Modify the Program Repeat to program the other tracksUnlocking the CD door Repeating TracksLocking the CD door Turn off the systemChanging the Equipment’s Name Using External EquipmentsListening to External Equipment To exit the source LINE, select other source e.g. CDAdjusting the Input Level Recording the System’s Source to External EquipmentPress the CLOCK/TIMER button Using the TimersSetting the Clock Press the 3 or 2 button to set the hourShowing the Clock Display Setting the Daily TimerPerform steps 2 to 5 in Setting the Clo- ck on Correcting the ClockSetting the on time Example Setting the OFF time ExampleSelecting the music source Press the Cancel button Turning the Daily Timer On and OffSetting the volume level Select the Fade functionDuring playback a source, press the Sleep button Setting the Sleep TimerTimer Priority Wait for a few secondsPossible Cause TroubleshootingSymptom ActionCare And Maintenance Specifications EN, CS 0403MNMCREJEM Victor Company of JAPAN, Limited Instructions Precaución Front view Vista frontal Visão frontal Introduction Table of Contents Troubleshooting Care And Maintenance Specifications Getting Started Connecting the FM Antenna Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 Removing the Speaker Grills SP-FSX1 Compu Play Volume + STANDBY/ON Adjusting the Brightness Dimmer at Power On Tone Control BASS/TREBLE Using the Tuner Presetting Stations Beat Cut AM Reception Source Selector Disc indicator CD door To Unload a CD Random Play CD Door Lock Using External Equipments Recording the System’s Source to External Equipment Using the Timers Showing the Clock Display Using the Timers Turning the Daily Timer On and Off Setting the Sleep Timer Troubleshooting Care And Maintenance Specifications EN, SP, PR 0503MNMCREJEM Victor Company of JAPAN, Limited

FS-X1, FS-X3 specifications

JVC has long been recognized as a key player in the consumer electronics sector, particularly in audio and video technology. Among its noteworthy products are the JVC FS-X1 and FS-X3, two speaker systems designed to deliver impressive sound quality and performance for various audio applications.

The JVC FS-X1 is positioned as a compact and versatile speaker option suitable for smaller spaces or as part of a multi-room audio setup. It features a well-engineered two-way design that includes a high-quality woofer and a dome tweeter. This combination ensures a balanced sound profile, making it ideal for listening to a range of music genres. With a frequency response that captures both low-end punch and crisp high notes, the FS-X1 is tailored for audiophiles and casual listeners alike.

One of the standout technologies employed in the FS-X1 is its advanced cabinet design, which minimizes unwanted vibrations and ensures clean sound reproduction. Additionally, the speaker integrates JVC's proprietary audio processing technologies, enhancing overall clarity and detail. This model is particularly user-friendly, with a variety of input options, including standard wire connections, allowing it to be easily integrated into existing audio setups.

On the other hand, the JVC FS-X3 builds upon the foundation of the FS-X1 while offering enhanced features for discerning users. This speaker system boasts a larger woofer, which contributes to improved bass response and a more robust overall soundstage. The FS-X3 is designed for those who prioritize sound depth and are looking for a speaker that can handle more demanding audio tracks.

Key features of the FS-X3 include an upgraded crossover network, which ensures a smooth transition between the woofer and tweeter frequencies. The design also focuses on aesthetics, featuring a stylish finish that can seamlessly blend into various home environments. Like its counterpart, the FS-X3 is equipped with multiple connectivity options for user convenience.

In summary, the JVC FS-X1 and FS-X3 are outstanding offerings in the world of audio equipment. The FS-X1 serves as an excellent entry-level choice for casual listeners, while the FS-X3 caters to those seeking superior sound performance. Both models embody JVC's commitment to delivering quality, versatility, and cutting-edge technology to enhance the listening experience at home or in any audio setup.
Top Page Image Contents