JVC FS-X1, FS-X3 manual Showing the Clock Display

Page 59

English

Using the Timers

3

Press the SET button.

Example:

 

The minute digits of the time indication blink on the dis- play.

•To return to the hour setting, press the CANCEL button.

4 Press the 3 or 2 button to set the minute. 5 Press the SET button.

“ADJUST OK!” appears on the display. The Clock in- dicator () remains lit. Then, the selected time is set and the seconds start counting from 0.

CAUTION:

•If there is a power failure, the clock loses its

setting. “0:00” and the Clock indicator () blinks on the display and the clock must be reset.

Alternates

(clock)

Display the source (clock is canceled)

Showing the Clock (DISPLAY)

You can show the current time on the display.

To display the clock, press the DISPLAY button on the Remote Control.

To return to the normal display, press the same button

again.

Correcting the Clock

Use the following method to correct any clock shift.

❑You can correct the clock whether the System is turned on or off.

1 Repeatedly press the CLOCK/TIMER bu- tton to show the clock on the display.

Each time you press the button, the display changes as follows.

2 Perform steps 2 to 5 in “Setting the Clo- ck” on page 22-23.

•When the System is in power saving mode, nothing ap- pears on the display. To see the clock, press the DIMMER button on the Remote Control.

•The clock may gain or lose one to two minutes per month.

•If there is a power failure, the clock loses its setting, “0:00” blinks on the display and the clock must be reset. To reset the clock, see “Setting the Clock” on page 22-23.

Setting the Daily Timer

Once you have set the Daily Timer, the timer will be acti- vated at the same time every day.

The “DAILY” indicator on the display shows that the Daily Timer you have set is in effect.

You can set the Daily Timer whether the System is on or off (but not in power saving mode (See page 11)).

•If you have made a mistake while setting the timer, press the CANCEL button on the Remote Control. However, this does not always cancel the current setting. If the CANCEL button does not work, press the CLOCK/TIMER button on the Remote Control repeatedly until the display returns to the original display, and start from the first step.

23

Page 58 Page 60
Image 59
Page 58 Page 60
Contents FS-X1/FS-X3 Important for Laser Products Front view Side view How This Manual Is Organized FeaturesIntroduction Table of Contents Troubleshooting Care And Maintenance Specifications Getting Started AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlUsing the Coaxial Type Connector Not Supplied Connecting the FM AntennaUsing the Supplied Wire Antenna Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 When attaching the speaker grills Connecting a Powered SubwooferConnecting an External Equipment When removingAutomatic Power On Connecting an MD Recorder, etc Optical Digital OutputChanging the Source Turning the Power On and OffBasic Operations Fade-out Muting Fade Muting Adjusting the Brightness Dimmer at Power OnPower Saving Mode Dimmer at Power Off Adjusting the VolumeEntering the Number with the Remote Control Numeric Keys No signal conditionTo disable the A.P.off function Auto Power Off A.P.offOne Touch Radio Using the TunerTuning In a Station Select a station using one of the follow- ing methodsPress the SET button within 5 seconds Presetting StationsTo Change the FM Reception Mode To change the preset stations, repeat the sameBeat Cut AM Reception Quickest Way To Start a CD Is With the One Touch Operation Using the CD PlayerWhen playing a CD-R or CD-RW To Insert a CDProgramming the Playing Order of the Tracks Program Play Basics of Using the CD Player Normal PlayTo Unload a CD Repeat to program the other tracks Press the CD 6button on the Remote ControlTo Modify the Program Random PlayTurn off the system Repeating TracksLocking the CD door Unlocking the CD doorTo exit the source LINE, select other source e.g. CD Using External EquipmentsListening to External Equipment Changing the Equipment’s NameRecording the System’s Source to External Equipment Adjusting the Input LevelPress the 3 or 2 button to set the hour Using the TimersSetting the Clock Press the CLOCK/TIMER buttonCorrecting the Clock Setting the Daily TimerPerform steps 2 to 5 in Setting the Clo- ck on Showing the Clock DisplaySelecting the music source Setting the on time ExampleSetting the OFF time Example Select the Fade function Turning the Daily Timer On and OffSetting the volume level Press the Cancel buttonWait for a few seconds Setting the Sleep TimerTimer Priority During playback a source, press the Sleep buttonAction TroubleshootingSymptom Possible CauseCare And Maintenance Specifications EN, CS 0403MNMCREJEM Victor Company of JAPAN, Limited Instructions Precaución Front view Vista frontal Visão frontal Introduction Table of Contents Troubleshooting Care And Maintenance Specifications Getting Started Connecting the FM Antenna Connecting the AM Antenna Connecting the Speakers SP-FSX1/SP-FSX3 Removing the Speaker Grills SP-FSX1 Compu Play Volume + STANDBY/ON Adjusting the Brightness Dimmer at Power On Tone Control BASS/TREBLE Using the Tuner Presetting Stations Beat Cut AM Reception Source Selector Disc indicator CD door To Unload a CD Random Play CD Door Lock Using External Equipments Recording the System’s Source to External Equipment Using the Timers Showing the Clock Display Using the Timers Turning the Daily Timer On and Off Setting the Sleep Timer Troubleshooting Care And Maintenance Specifications EN, SP, PR 0503MNMCREJEM Victor Company of JAPAN, Limited

FS-X1, FS-X3 specifications

JVC has long been recognized as a key player in the consumer electronics sector, particularly in audio and video technology. Among its noteworthy products are the JVC FS-X1 and FS-X3, two speaker systems designed to deliver impressive sound quality and performance for various audio applications.

The JVC FS-X1 is positioned as a compact and versatile speaker option suitable for smaller spaces or as part of a multi-room audio setup. It features a well-engineered two-way design that includes a high-quality woofer and a dome tweeter. This combination ensures a balanced sound profile, making it ideal for listening to a range of music genres. With a frequency response that captures both low-end punch and crisp high notes, the FS-X1 is tailored for audiophiles and casual listeners alike.

One of the standout technologies employed in the FS-X1 is its advanced cabinet design, which minimizes unwanted vibrations and ensures clean sound reproduction. Additionally, the speaker integrates JVC's proprietary audio processing technologies, enhancing overall clarity and detail. This model is particularly user-friendly, with a variety of input options, including standard wire connections, allowing it to be easily integrated into existing audio setups.

On the other hand, the JVC FS-X3 builds upon the foundation of the FS-X1 while offering enhanced features for discerning users. This speaker system boasts a larger woofer, which contributes to improved bass response and a more robust overall soundstage. The FS-X3 is designed for those who prioritize sound depth and are looking for a speaker that can handle more demanding audio tracks.

Key features of the FS-X3 include an upgraded crossover network, which ensures a smooth transition between the woofer and tweeter frequencies. The design also focuses on aesthetics, featuring a stylish finish that can seamlessly blend into various home environments. Like its counterpart, the FS-X3 is equipped with multiple connectivity options for user convenience.

In summary, the JVC FS-X1 and FS-X3 are outstanding offerings in the world of audio equipment. The FS-X1 serves as an excellent entry-level choice for casual listeners, while the FS-X3 caters to those seeking superior sound performance. Both models embody JVC's commitment to delivering quality, versatility, and cutting-edge technology to enhance the listening experience at home or in any audio setup.
Top Page Image Contents