Star Trac 727-0083 manual Tivate Setup Mode, Mode options ∙ Gear and Software Version

Setup Mode

Spinning® Computer is pre-set with a gear ratio 2 and a setting display distance in miles. It re-set with recommended default settings for the length of time the backlight will stay on w ted and the length of time summary information will be displayed. You can make changes settings by following the steps below. (You will first need to install 4 AA batteries in the uter.) Any time you want to change setting or view information, follow these Setup Mode st

tivate Setup Mode:

1.Press any button to activate computer.

2.Wave a magnet along the right side of the Spinning® Computer until the display window shows all LCD segments flash.

3.Press Toggle (right) button to scroll through available setup options.

4.Press the Light (left) button to change settings on the current display option.

Mode options:

∙GEAR and Software Version

oGear Ratio, Select 1 (2.875) for V-Bikes. o Select 2 (3.250) for all other models.

o Software Version displayed (-XX)

(Default Setting)

Note: User will not get the correct RPM values if the Gear Ratio setting is not correct.

15