Star Trac 727-0083 manual = Weekly M= Monthly, No display

Page 25

FAQ’sPreventativeMaintenanceand TroubleshootingMaintenaChecklist ce

rac strongly recommends performing the regular daily, weekly and monthly preventive enance routines outlined below. If any items need replacement contact the Star Trac Cust ort Department at 800-503-1221 or 1-714-669-1660.

aily

W= Weekly M= Monthly

W

M

 

Procedure

 

 

 

 

 

Daily maintenance of the computer will determine its life of the computer by how consistently it is

 

 

performed.

 

 

Wipe down the computer with a soft cloth after each use.

 

 

Dilute Simple Green (1) with water (30) (30:1 ratio) spray onto a soft cloth then wipe the Spinne

 

 

 

Computer.

 

 

 

NOTE: Never spray directly onto the Spinner Computer.

 

 

Never use abrasive cleaning liquids or oil base, ammonia or alcohol when wiping down the com

 

 

 

 

 

The w eekly maintenance should focus on the overall performance of the computer. During this port

 

 

the maintenance look for vibration and possible loose assemblies.

P

 

Inspect each computer f or loose parts, bolts and nuts. Adjust as necessary.

P

 

Remove any computers that are not properly mounted and are deemed unsafe.

 

 

 

 

 

The monthly maintenance check should be a comprehensive inspection of the overall assembly

 

 

components of the computer.

 

P

Inspect all areas for proper adjustments

 

P

Inspect all parts to determine damage which will require possible part replacement.

 

P

Battery Low will display when the battery needs replacement. Replace the batteries in the com

 

 

 

with 4 high quality AA Alkaline batteries such as Duracell or Energizer.

 

P

Inspect the mounting of the cadence sensor and magnet to insure it is intact and working prope

 

 

 

 

Depending on the amount of use, some procedures may need to be performed more frequ

No display

22

Image 25
Contents Star Trac Fitness Spinning ComputerPage Table of Contents FCC Regulatory Statements Parts List Marketing Statement Regarding Heart Rate Page Specifications How does the Spinning computer work? How it WorksButtons Computer Window and ButtonsRequired Installing or Replacing BatteriesInstalling or Replacing Batteries cont’d Do I need to Re-sync? Required EST Procedure Testing for RPMTo Syncing Syncing ModeSyncing Process cont’d Wait for 60 seconds Tivate Setup Mode Setup ModeMode options ∙ Gear and Software Version Setup Mode- cont’d Setup Mode- cont’d Do not over tighten the set screw Installation of Cadence Sensor and Magnet All SpinnersMounting Computer On Handlebars V-Bikes Mounting Computer On Handlebars Pro 5800 / 6800 / Elite Mounting Computer On Handlebars Elite 6900 and NXT No display = Weekly M= MonthlyHeart rate drops out No heart rateWhich heart rate strap works with my Spinning Computer? Picking up another riders heart rateWhat is the battery life? Battery light does not stay on long enoughNo RPM What does the computer display?Nce, Resistance And Intensity Spinning Instructor EducationRate Monitoring Gy Zone Intensity Range Purpose ZonesNce Range for Flat Roads 80-110 RPM Is Cadence?Ing Faster Than 110 RPM Is Unrealistic because Ing Faster Than 110 RPM Is Counterproductive becauseCing In The Saddle Ood To Pedal Faster Than 110 RPM?Nce Range For Hills 60-80 rpm Page For Choosing An Appropriate Cadence And Resistance Ing The Concept Elationship Between Cadence And ResistanceNce Drill #1 Teaching The Concept Of Cadence Vs. Resistance Cadence DrillsCe Test Erations Spin-Ups ErsPage This page intentionally left blank Time Duration Movement/Cadence Intensity Technique Ing Ride ProfileRPM . Find the right resistance to maintain a h This page intentionally left blank This page intentionally left blank Rev F