Do I need to Re-sync?
:Syncing will not improve Heart Rate and is not a calibration it should only be used to Syn up) the cadence sensor and the computer so that RPM can be transmitted.
m the Syncing process after checking all of the following:
∙Do the serial numbers on the cadence sensor and the computer match?
o If they do not match the handlebar has been swapped with another bike and should be swapped back, so the computer and sensor are matched up again.
∙Is the battery secure in the cadence sensor and the cover is not loose?
o A loose battery will prevent the cadence sensor to transmit the RPM signal to th computer.
∙Is the magnet aligned with the cadence sensor?
o A missing magnet or one that is not lined up properly will prevent the cadence s to transmit the RPM signal to the computer.
∙Does the computer turn on when you press a button?
o If the computer does not turn on replace the batteries in the computer.
∙The computer turns on but as you pedal it does not show the RPM.
o If you have performed all of the above steps you may now sync the computer an cadence sensor. This will make them a paired set and will be able to transmit an receive the RPM signal.
10