JVC manual Connecting Other Equipment, For CA-MXGT700 To remove the speaker grilles

Page 13

Continued

English

For CA-MXGT700:

To remove the speaker grilles

The speaker grilles are removable as the illustration below.

SP-MXGT700

Projections

Connecting Other Equipment

You can connect both analog and digital equipment.

•DO NOT connect any equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

To connect an analog component

Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

Holes

Speaker grille

To audio output

AUX IN

Audio/video equipment

To remove the speaker grille, insert your fingers around the projection at the top of the speaker grille, then pull gently towards you by holding the side. Do the same for the rest of projections each at a time.

To attach the speaker grille, put the projections of the speaker grille into the holes of the speaker.

For playing the other equipment through this unit,

connect between the audio output jacks on the other equipment and AUX IN jacks by using audio cords (not supplied).

To connect audio equipment with an optical digital input terminal

You can record CD sound onto the connected digital equipment.

DIGITAL OUT (OPTICAL)

Protective plug

Before connecting the other equipment, remove the protective plug from the terminal.

		Audio equipment
To optical		with an optical digital
To optical		input
digital input

Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the DIGITAL OUT [OPTICAL] terminal.

– 8 –

Image 13

Contents CA-MXGT700 CA-MXG500 Page English Español Português Precaución el aparato debe estar bien ventilado Class Laser Product Introduction PrecautionsAbout This Manual Contents Front Panel Location of the Buttons and ControlsDisplay window Front PanelRemote Control Remote ControlGetting Started Connecting AntennasUnpacking Release the finger from the clamp Connecting SpeakersAM antenna To connect an outdoor AM antennaFor CA-MXGT700 To remove the speaker grilles Connecting Other EquipmentTo connect an analog component Canceling the Display Demonstration Adjusting the Voltage SelectorTo cancel the display demonstration, press On the unit onlySetting the Clock Turning On or Off the PowerOn the unit only Press CLOCK/TIMER Common OperationsAdjusting the Volume Setting the AM Tuner Interval SpacingTo turn down the volume level temporarily Selecting the SourcesSelecting the Sound Modes Reinforcing the Bass SoundSurround modes SEA Sound Effect Amplifier modesPresetting Stations Tuning in a StationTuning in a Preset Station Listening to the RadioPlaying Back CDs-All Disc and One Disc Playing Back CDsLoading CDs Basic CD Operations Press one of the disc number Buttons CD1, CD2, and CD3 to Programing the Playing Order of the Tracks --Program PlayRepeating Tracks or CDs--Repeat Play Playing at Random--Random PlayProhibiting Disc Ejection--Tray Lock Press one of the disc number Buttons CD1, CD2, and CD3Playing Back a Tape Playing Back TapesPress Eject 0 for the deck you want to use Close the cassette holder gentlyRecording a Tape on Deck B RecordingPress REC START/STOP CD Synchronized Recording Dubbing TapesOn the unit only Press Tape 3, then Press DubbingSinging Along-Karaoke Using the MicrophonesUsing Daily Timer Using the TimersPress CLOCK/TIMER again Using Recording TimerTimer Priority Using Sleep TimerOn the remote control only Press Sleep Cleaning the unit MaintenanceHandling discs Handling cassette tapesSymptom TroubleshootingSpecifications CA-MXG500 Important for mains AC line SP-MXG500 Connection Conexión 0205NSMMDWSAM