INTRODUCTION IMPORTANT PRECAUTIONS
A S S E M B LY STEP 2
�������� | ������������ | |
����������������� | ||
| ||
��������������� | �������������������� | |
| ||
| ������������� |
����������
�������
����
�������
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL CONDITIONING TROUBLESHOOTING LIMITED
OPERATION GUIDELINES & MAINTENANCE WARRANTY
8
����������
A)Open HARDWARE BAG FOR STEP 2.
B)Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
C)Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).
HARDWARE BAG FOR STEP 2 CONTENTS :
�������� | ����������������� | ��������������� |
����� | ����� | ����� |
������ | ������ | ������ |
���������
�����
������
��������������
���������� ���������������
D)Insert the left TOP SIDE COVER, followed by the right TOP SIDE COVER and snap them together.
E)Insert ACCESSORY TRAY and secure it using 2 SCREWS (D) as shown.
F)Slide CONSOLE MAST GROMMET down to seal the console mast hole.
9
ASSEMBLY
BEFORE YOU BEGIN
LIMITED TROUBLESHOOTING CONDITIONING ELLIPTICAL WARRANTY & MAINTENANCE GUIDELINES OPERATION
6/3/05 5:42:03 PM |