S E M B LY CSE4 only S E M B LY Step | Horizon Fitness CSE 3.5

INTRODUCTION

A S S E M B LY STEP 7 (CSE4 . 5 ONLY)

A S S E M B LY STEP 8

INTRODUCTION

IMPORTANT PRECAUTIONS

ASSEMBLY

BEFORE YOU BEGIN

	��	��
	��	��
	��	��
��	��	��
	��

��

CSE4.5 ONLY

A) Open HARDWARE BAG FOR STEP 7.

B) Pull LOWER LINK ARM towards you to acess elbow joint to attach ELBOW COVERS. Once it is in it’s forward

��

A ) Open HARDWARE BAG FOR STEP 8.

B)Align LOWER LINK ARM with U BRACKET.

��

IMPORTANT PRECAUTIONS

ASSEMBLY

BEFORE YOU BEGIN

ELLIPTICAL

OPERATION

CONDITIONING TROUBLESHOOTING LIMITED

GUIDELINES & MAINTENANCE WARRANTY

most position, rest the LOWER LINK ARM on the GUIDE RAIL (as shown).

CAUTION: Be careful to keep the LOWER LINK ARM and LOWER HANDLEBAR aligned with guide rail. Do not twist them to the left or right while pulling them towards you.

C)Attach INSIDE & OUTSIDE ELBOW COVERS to elbow joint using 2 SCREWS (L) and 1 SCREW (M) (as shown).

D)Repeat on other side.

HARDWARE BAG FOR STEP 7 CONTENTS :	CSE4.5 ONLY
��	��
��	��
��	��

CAUTION: Be careful to keep the LOWER LINK ARM aligned with guide rail. Do not twist it to the left or right while positioning it on the U BRACKET.

C)Insert 2 TEFLON WASHERS (E) on left and right sides of FOOT PLATE TUBE before sliding SPACER (F) through U BRACKET and FOOTPLATE TUBE.

D)Insert FLAT WASHER (C) and BOLT (G) into outside end of FOOTPLATE TUBE to secure LOWER LINK ARM to

PEDAL ARM.

E)Repeat on other side.

HARDWARE BAG FOR STEP 8 CONTENTS :

��

��	��
��	��
��	��

ELLIPTICAL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

CSE3.5-4.5 Elliptical Rev 0.4.indd 14-15

6/3/05 5:42:17 PM