Manuals / Siemens / Computer Equipment / Network Router

Siemens 2602 manual Appendix C, Specifications

Models: 2602

1 32

Download 32 pages 12.82 Kb

Page 32

APPENDIX C

Specifications

WAN Interface

10BASE-T, 1 RJ-45 port

LAN Interface 10BASE-T/100Base-TX

(2) RJ-45 ports

Management

Web management interface

Advanced Features

Dynamic IP Address Configuration – DHCP, DNS

Firewall – Client privileges, hacker prevention and logging, NAT

Virtual Private Network – PPTP, L2TP, IPSec

Internet Standards

ARP (RFC 826), IP (RFC 791), ICMP (RFC 792), UDP (RFC 768), TCP (RFC 793), Telnet (RFC 854-859), MD5 (RFC 1321), BOOTP Extension (RFC 1497), PPP LCP Extension (RFC 1570), PPPoE (RFC 2516), NAT (RFC 1631), PPP (RFC 1661), HTML (RFC 1866), HTTP (RFC 1945), CHAP (RFC 1944), DHCP (RFC 2131), PPTP (RFC 2637)

Indicator Panel

LAN (Link, Activity), WAN (Link, Activity), Power

Dimensions

8 x 4.5 x 2 in. (203 x 114.3 x 50 mm.)

Weight

11.5 oz. (326 g)

Input Power

5V DC (2.4A)

Maximum Current

0.40A RMS max.@110V, 0.4A RMS max.@240V

Power Consumption

6.5 Watts max. @ 100-240 VAC

Heat Dissipation

144 BTU/hr max. @ 100-240 VAC

Temperature

Operating 32 to 104°F (0 to 40°C)

Storage -40 to 158°F (-40 to 70°C)

Humidity

5% to 95% (noncondensing)

C-1

Image 32

Siemens 2602 manual Appendix C, Specifications

Contents

2602 User GuideSpeedStream 2-port DSL/Cable RouterTABLE OF CONTENTS Installating the SpeedStream3 Configuring the SpeedStream 2602 4 Installing and Configuring TCP/IPAppendixes Features and Benefits INTRODUCTIONAbout the SpeedStream CHAPTERApplications INSTALLING THE SPEEDSTREAM Package ContentsDescription of Hardware CHAPTERDescription Figure 2-1. SpeedStream 2602 DSL/Cable RouterTable 2-1. SpeedStream 2602 Unit Components Hardware Installation Installation ProcedureSystem Requirements Before Startingadapter or to another network device Figure 2-3. WAN Connection 8. Reboot the computer when promptedTable 2-2. LED Status Indicators CONFIGURING THE SPEEDSTREAM Web Browser Management InterfaceNavigating the Management Interface CHAPTERTable 3-1. Management Interface Main Menu Configuration ChangesMenu Selections 4. In the General box, select Temporary Internet Files View Network and Device Status2. On the Tools menu, click Internet Options Simple Setup Procedures Set or Change a PasswordConfigure the WAN Connection 2. On the Simple Setup menu, click Change PasswordPPP over Ethernet PPPoE Dynamic IP Address DHCPStatic IP Address Fixed IP Advanced Setup Procedures Configure LAN Gateway and DHCP SettingsAutomatically Entering Port Information Enable Firewall ProtectionEnable Virtual Server Configure Special Applications Network Address Translation NATFigure 3-3. Advanced Setup Special Applications Automatically Entering Port InformationConfigure Miscellaneous Features Configure Client FilteringSet or Change a Password 2. On the Tools menu, click Change PasswordSystem Tools Reset Router Restore Factory DefaultsUpdate Firmware Backup SettingsINSTALLING AND CONFIGURING TCP/IP Install the TCP/IP Protocol1. Click Start/Settings then click Control Panel CHAPTER1. On the IP Address tab, select Obtain an IP address automatically Configure TCP/IP for the SpeedStreamDynamic IP Allocation via a DHCP Server Manual IP Configuration TCP/IP VerificationIs TCP/IP properly configured on your computer? 2. If the request times out, confirm the following items in sequenceCONFIGURING PRINTER SERVICES Install the Printer Port Monitor Windows 95/98/NTConfigure the Print Server Windows 95/98/NTWindows Windows MEUnix Systems 3. Click to add a Local printer or Network printerAction Appendix A TROUBLESHOOTINGSymptom Technical Support Twisted-pair Cable Cable Types and SpecificationsAppendix B CABLES Ethernet Cable RJ-45 Pin Assignments RJ-45 Pin NumberingMDI Signal Name MDI-X Signal NameAPPENDIX C Specifications