Siemens 2602 manual Configure TCP/IP for the SpeedStream, Dynamic IP Allocation via a DHCP Server

Figure 4-2. Select Network Protocol

6.The TCP/IP protocol will be listed in the Network window. Click OK to complete the install procedure, and restart your computer to enable the TCP/IP protocol.

Configure TCP/IP for the SpeedStream 2602

When TCP/IP is installed on your computer, follow these instructions to configure it for the SpeedStream 2602:

1.On the Windows taskbar, click Start Settings Control Panel.

2.Double-click the Network icon; then click the Configuration tab and select the TCP/IP for your network card.

3.Click the Properties button to enter the TCP/IP properties for the SpeedStream 2602. You can dynamically assign TCP/IP address settings to a client, or you can manually configure a client with address settings to meet your specific network requirements. (Note that the default IP address of the SpeedStream 2602 is 192.168.254.254.)

Dynamic IP Allocation via a DHCP Server

1.On the IP Address tab, select Obtain an IP address automatically.

2.Do not enter any values under the Gateway tab.

3.On the DNS Configuration tab, select Disable DNS. These settings will be automatically configured by the DHCP server.

4-2