Horizon Fitness E95 manual Assembly Step, YOU’RE Finished

INTRODUCTION

ASSEMBLY STEP 6

IMPORTANT PRECAUTIONS

ASSEMBLY

	UPPER HANDLEBAR
NOTCH
TAB	PRE-ATTACHED
	SET SCREWS
CONSOLE MAST
	LOWER HANDLEBAR

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.

A)Slide LOWER HANDLEBAR onto CONSOLE MAST. Secure LOWER HANDLEBAR to CONSOLE MAST using PRE-ATTACHED SET SCREWS.

B)Slide UPPER HANDLEBAR onto CONSOLE MAST and align NOTCH with TAB making sure bars are joined together completely. Secure UPPER HANDLEBAR to CONSOLE MAST using PRE-ATTACHED SET SCREWS.

C)Repeat on other side.

BEFORE YOU BEGIN

A S S E M B LY STEP 7

ELLIPTICAL OPERATION

CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE

PRE-ATTACHED SCREW

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.

A)Attach the CONSOLE MAST wires to the CONSOLE WIRES.

B)Carefully tuck the CONSOLE MAST wires into the CONSOLE MAST before attaching the CONSOLE.

C)Attach CONSOLE to the CONSOLE MAST using the PRE-ATTACHED SCREWS (screws will have to be removed from the console first).

DO NOT PINCH WIRES!

YOU’RE FINISHED!

LIMITED WARRANTY

10