Precor 835 warranty Hardware Kit not to scale, Fasteners

Page 16

14	Assembling and Maintaining the 835 Climber

Important: When wrench tightening, the head of the fastener should be flush with the product. If it is not, cross-threading has occurred. Do not attempt to rework the assembly as more damage to the equipment will occur. Contact Customer Support. Refer to Obtaining Service.

If you plan to move the unit, obtain help and use a hand truck. Do not grasp any plastic parts while lifting or moving the unit. The plastic parts are not capable of supporting the weight of the unit and they may break.

Hardware Kit (not to scale)

Fasteners	Quantity
Washer (⁵₁₆-inch inside	4
diameter, 0.688-inch outside
diameter)
Buttonhead screw (¹₂-inch)	6
Hex head screw (1-inch)	4
Sockethead cap screw	2
(1¹₄-inch)
Phillips-head screw (³₄-inch)	3
End cap	2

Lower handrail boot

2

Image 16

Contents Assembling and Maintaining the 835 Climber Page Page Trademark Note Edition InformationIntellectual Property Notice Important Safety Instructions Safety PrecautionsAssembling and Maintaining the 835 Climber Educating Users Product Recycling and Disposal Hazardous Materials and Proper DisposalRegulatory Notices for the Rfid Module Federal Communications Commission, Part Radio Frequency Interference RFIIndustry Canada Safety Approvals for Cardiovascular Equipment Regulatory Notices for Cardiovascular Exercise EquipmentEuropean Applications Cardiovascular Type EquipmentUser’s authority to operate the equipment Obtaining Service Obtaining Updated Documentation IEC-320 C13 and C14 plugsTable of Contents Commercial Cardiovascular Equipment Limited Warranty Assembling the Climber Preparing for InstallationUnpacking the Equipment Hardware Kit not to scale FastenersRequired Tools Assembling the ClimberTo assemble the main climber mechanism Important Do not tighten the two hex nuts at this time Slide the plastic top cover onto the upright support Securing the upright support to the climber base Sliding the grommet into place Attaching the Handrails To attach the handrailsAttaching the end caps Making Sure the Unit Is Stable To level the unitThreading the Cable Assembly Installing the ConsoleTo thread the cable assembly Console positioning on base unit Connecting Cables P30 LocationCompleting the Console Installation To complete the installationVerifying That the Heart Rate Display Is Operational To verify that the heart rate display is operationalMaintenance Daily CleaningDaily Inspection Storing the Chest StrapLong-Term Storage Moving the EquipmentTo move the climber Assembling and Maintaining the 835 Climber Self-Powered Features Rate of MotionSymptoms of a Low Battery Informational Displays Prior to ShutdownUsing the Optional Power Adapter Optional Power Adapter KitReplacing the Battery Limited Warranty Commercial Cardiovascular Equipment Limited WarrantyWarranty Periods and Coverage Conditions and Restrictions Exclusive Remedies Exclusion of Consequential and Incidental Damages Complete this portion and keep for your recordsCommercial Cardiovascular Equipment Limited Warranty Assembling and Maintaining the 835 Climber Page Precor Incorporated