Precor 835 warranty Slide the plastic top cover onto the upright support

Page 19

Assembling the Climber

17

7.Slide the plastic top cover onto the upright support.

Important: The correct orientation of the plastic top cover is shown in the following illustration.

8.Retrieve the cable assembly from the console container and remove any packaging ties. Feed the cable assembly through the opening in the console mount, then down through the upright support, and finally out through the opening in the lower back of the support, as shown in the following illustration.

Figure 5: Routing cables through the upright support

Image 19

Contents Assembling and Maintaining the 835 Climber Page Page Trademark Note Edition InformationIntellectual Property Notice Safety Precautions Important Safety InstructionsAssembling and Maintaining the 835 Climber Educating Users Product Recycling and Disposal Hazardous Materials and Proper DisposalRegulatory Notices for the Rfid Module Federal Communications Commission, Part Radio Frequency Interference RFIIndustry Canada Cardiovascular Type Equipment Safety Approvals for Cardiovascular EquipmentRegulatory Notices for Cardiovascular Exercise Equipment European ApplicationsUser’s authority to operate the equipment IEC-320 C13 and C14 plugs Obtaining Service Obtaining Updated DocumentationTable of Contents Commercial Cardiovascular Equipment Limited Warranty Assembling the Climber Preparing for InstallationUnpacking the Equipment Fasteners Hardware Kit not to scaleRequired Tools Assembling the ClimberTo assemble the main climber mechanism Important Do not tighten the two hex nuts at this time Slide the plastic top cover onto the upright support Securing the upright support to the climber base Sliding the grommet into place To attach the handrails Attaching the HandrailsAttaching the end caps To level the unit Making Sure the Unit Is StableThreading the Cable Assembly Installing the ConsoleTo thread the cable assembly Console positioning on base unit Location Connecting Cables P30To verify that the heart rate display is operational Completing the Console InstallationTo complete the installation Verifying That the Heart Rate Display Is OperationalDaily Cleaning MaintenanceStoring the Chest Strap Daily InspectionLong-Term Storage Moving the EquipmentTo move the climber Assembling and Maintaining the 835 Climber Rate of Motion Self-Powered FeaturesInformational Displays Prior to Shutdown Symptoms of a Low BatteryOptional Power Adapter Kit Using the Optional Power AdapterReplacing the Battery Limited Warranty Commercial Cardiovascular Equipment Limited WarrantyWarranty Periods and Coverage Conditions and Restrictions Exclusive Remedies Complete this portion and keep for your records Exclusion of Consequential and Incidental DamagesCommercial Cardiovascular Equipment Limited Warranty Assembling and Maintaining the 835 Climber Page Precor Incorporated