Precor 835 warranty Securing the upright support to the climber base

Page 20

18	Assembling and Maintaining the 835 Climber

9.Ask your assistant to hold the upright support while you attach it to the base frame using four hex head screws and four washers. Using a ¹₂-inch box wrench or open-end wrench, tighten the four fasteners in alternating order until all four are fully secured.

Figure 6: Securing the upright support to the climber base

CAUTION: In the following step, be careful to avoid the sharp edges on the metal bracket. Do not injure yourself when you connect the cable.

10.Connect the console power cable to its receptacle on the base frame.

11.Lower the plastic top cover. Tip the cover to insert the front tab, then align the rear tab. Apply pressure to lock the rear tab in place.

Image 20

Contents Assembling and Maintaining the 835 Climber Page Page Intellectual Property Notice Edition InformationTrademark Note Important Safety Instructions Safety PrecautionsAssembling and Maintaining the 835 Climber Educating Users Regulatory Notices for the Rfid Module Hazardous Materials and Proper DisposalProduct Recycling and Disposal Industry Canada Radio Frequency Interference RFIFederal Communications Commission, Part Safety Approvals for Cardiovascular Equipment Regulatory Notices for Cardiovascular Exercise EquipmentEuropean Applications Cardiovascular Type EquipmentUser’s authority to operate the equipment Obtaining Service Obtaining Updated Documentation IEC-320 C13 and C14 plugsTable of Contents Commercial Cardiovascular Equipment Limited Warranty Unpacking the Equipment Preparing for InstallationAssembling the Climber Hardware Kit not to scale FastenersTo assemble the main climber mechanism Assembling the ClimberRequired Tools Important Do not tighten the two hex nuts at this time Slide the plastic top cover onto the upright support Securing the upright support to the climber base Sliding the grommet into place Attaching the Handrails To attach the handrailsAttaching the end caps Making Sure the Unit Is Stable To level the unitTo thread the cable assembly Installing the ConsoleThreading the Cable Assembly Console positioning on base unit Connecting Cables P30 LocationCompleting the Console Installation To complete the installationVerifying That the Heart Rate Display Is Operational To verify that the heart rate display is operationalMaintenance Daily CleaningDaily Inspection Storing the Chest StrapTo move the climber Moving the EquipmentLong-Term Storage Assembling and Maintaining the 835 Climber Self-Powered Features Rate of MotionSymptoms of a Low Battery Informational Displays Prior to ShutdownUsing the Optional Power Adapter Optional Power Adapter KitReplacing the Battery Warranty Periods and Coverage Commercial Cardiovascular Equipment Limited WarrantyLimited Warranty Conditions and Restrictions Exclusive Remedies Exclusion of Consequential and Incidental Damages Complete this portion and keep for your recordsCommercial Cardiovascular Equipment Limited Warranty Assembling and Maintaining the 835 Climber Page Precor Incorporated